Advance High Efficient Air Purifier With Dehumidifier

Bullets:-
a cModel a ADPH120B
a cColour a White
a cOperation Mode a Automatic
a cCompact and modern design & Air purifying with ionizer, HEPA.
a cExtremely quiet operation (36dB (A)) & Auto defrosting.
a cWater Tank Full Alarm & Water Continuous Drain Option
a cAuto shut off when water tank is full
a cLow power consumption & Environment Friendly CFC Free Gas
a c3 in 1 Dehumidifier ( Dehumidification , Filtration and Dryer)
a c1 Year warranty against any manufacturing defect

Product Specification
a cDehumidify Capacity:- 12Ltrs./Day(30a ,80%RH)
a cFull Water Quantity:- 2L
a cAir Circulation:- 130m3/hr
a cPower Supply:- 220V-240V/50Hz
a cPower Consumption:- 215W
a cNoise:- a 36dB(A)
a cRefrigerant / Charge:- R134a/85g
a cControl Type:- Electronic/Press button
a cStatus Indicator:- Buker full signal light
a cTimer:- 1-24hr
a cAuto Defrost:- Yes
a cIonizer:- Yes
a c3-color RH% indicator:- Optional

Product Description:-
Operations
1)Power
In the standby state, press the power button to turn on, the operation indicator lights up and the default fan speed is high, and the default humidity is 50%. In the power-on state, press the power button to turn off, the running indicator light goes off and the compressor stops immediately, and then the fan shut down after 30 seconds delay.

2)Modes
Auto mode - continuously drying mode-sleeping mode cycle, press once to switch the mode from one to another, the corresponding indicator lights up.
a Auto mode: when environmental humidity a Y set humidity +3%, the fan starts working and compressor starts working after 3 seconds. When environmental humidity a set humidity -3%, the compressor stops working and fan stops working after 30 secondsa delay. Both fan speed and humidity can be adjusted under auto mode.
a Continuously drying mode: The machine continues to run, but the humidity cannot be adjusted.
a Sleeping mode: Touch the sleep button, the button lights up and start the sleep
Function. After no operation in 10 seconds, all indicators turns dark gradually and the
Wind speed is automatically switched from high to low. Touch any button to wake up the indicator. Touch sleep button again to exit the sleep mode.
When environmental humidity a 57%i compressor stops working and the fan shut down after 30 secondsa delay. When environmental humidity a Y 63%i the fan starts working and compressor starts working after 3 seconds. Fan speed and humidity cannot be adjusted under sleeping mode.

3)Timer
Press the timer button to set the 0-12 hour timing function. The interval is 1 hour. Each time you press this button, the value increased 1 hour and then the corresponding timing value is displayed on the screen. The setting value is a 00a to cancel the timer function. The indicator turns out. After the timer is set and completed, the timer LED is on during the timing period. After the timing is over, the timer LED turns off automatically.
In the running state, set the time to turn off the machine;
in the standby state, set the time to turn on the machine.

4)Humidity set
Touch the humidity button to check the current environment humidity, touch this Humidity set button again and you can set the humidity. The range of target humidity is 30%- 35% - 40% - 45% - 50% - 55%- 60% - 65% -70% - 75%- 80%. After setting 3 seconds, the system confirms the input value and then the machine exits the setting state, and returns the current humidity. In the drying mode, the target humidity cannot be changed. Long Press humidity button for 3 seconds to display the current ambient temperature.

5)Speed
High wind - low wind cycle, press button once to switch and then the corresponding
Indicator lights up. In continuously drying mode, sleep mode and defrosting period, the wind speed cannot be changed.

6)Ionizer / Child-lock
Press this button to turn on or off the Ionizer purification function.
Long press the wind speed button for 3 seconds to turn on/off the child-lock function.