Airsense 10 Autoset Cpap Machine By Creative Medical Devices

Model : AirSense 10 Autoset
Pressure Range (cm H2O) : 4 - 20 cm H2O (4 - 20 hPa)
Sound/Noise Level (db) : Pressure Level - 25 dBA with uncertainty of 2 dBA, Power Level - 33 dBA with uncertainty of 2 dBA
Hypoallergenic Air Filter : Material: Acrylic and polypropylene fibers in a polypropylene carrier, Efficiency: >98% for 7-8 micron dust, >80% for 0.5 micron dust
Electrical Requirements : AC Input Range: 100 - 240 V, 50 - 60 Hz 1 - 1.5 A, Class II / 115 V, 400 Hz 1.5 A, Class II (nominal for aircraft use) / DC Output - 24 V, 3.75 A
Pressure Sensor : Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa)
Flow Sensor : Internally located at device inlet, digital mass flow type, -70 to +180 L/min
Air Outlet : 22 mm
Supplemental oxygen : 4 L/min (Maximum Flow)
Housing Construction : Flame retardant engineering thermoplastic
Standard Air Filter : Material: Polyester non woven fiber, Average arrestance: Less than 75% for nearly 7 micron dust
Maximum Single Fault Steady State Pressure : Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.
Warranty : 2 Years
Power Supply Unit : 90 W Power Supply Unit
Humidification : Humidifier Material - Injection molded plastic, Stainless steel and Silicone seal
Dimensions : 150 x 255 x 116 mm
Maximum Gas Temperature : Greater than equal to 41A C
Cut-Out : 74A C
Maximum Heater Plate : 68A C