Auto Mains Failure Panel By Prateek Power Industries

Our Auto Mains Failure Panels, also known as AMF panels, are used to automatically changeover from mains electricity supply to stand-by generator or genset on failure of the mains supply. When the mains supply is restored, the system automatically changes back and stops the genset. The stand-by generator will be eventually shut down after a short cooling down period.

Product Description :
a c These panels are provided with mechanically or electrically interlocked pole contactors or MCCBs. They are either installed on a wall or in a free standing outdoor cabinet with cable. The entry and exit takes place through the base through detachable aluminium gland plates.

a c Connection could be either hard wired or by means of single pole or multi-pin connectors.

a c The panel have a circuit, which is so constituted so as to send a start signal to the generator in case of failure of the mains supply.

a c Provided with a phase sequence relay that makes it sure that the generator supply has the accurate phase rotation.

a c These panels changes source current only after a preset time delay. This provides sufficient time to the generator to start prior to taking the load.

a c The panel is also equipped with a manual over-ride control.

a c AMF panels can be relay operated or PLC operated and elective features like auto start, auto changeover, no break change over, etc. are also available.