Biomass Briquetting Plant Manufacturer(jumbo - 90)

Product Information
The Briquette press is
a raw type press designed for continuous heavy duty operation with
two load wheels. One of the load wheels acts as a pulley and is
driven by the main motor through flat belt. Forced lubrication is
provided by oil lubrication system which gives longer life to press.
Dry and homogenous
prepared powder form from raw material is few through screw conveyor
to kupy by means of vertical screws with its own geared motor. It
recompresses and forces the material downwards in to the feeder
boxes. From the feeder

boxes the material is
forced by the ram through a taper die system the cooling tower in the
form of briquettes. The total operation should be continuous and it
is controlled and operated by panel board. Panel board also provides
safety measurements.
Briquetting press
are mainly of two types: 1.
SUPER - 60:
Briquettes produced from this press is 60 mm. OD and in production
basis it is a two
types the first gives 550 Kg / Hour. output and second 750 Kg / Hour.

2. JUMBO - 90:
Briquettes produced from this press is 90 mm. OD. This press does not
requirepowder making units and it gives 1500 Kg / Hrs production.
POWDER MAKING UNIT
/ SIZING UP UNIT.Screw Conveyer.

With reeducation gear
and electric motor for regular feeding of raw material of hammer
mill.
Hammer Mill.

With electric motor,
V-belt pulley it it made up of 60-65 nose blunt end hanging blades
and 25 nos. of fixed head blades to convert raw material into powder
form according to requirement.
Blower &
conveying plant.

Raw material passes
through hammer mill & directly sucked by the blower and conveying
pipe and transferred to storage bin (Holding bin) through cyclone.
Cyclone acts as a separator of air and powder from raw material.
Holding Bin:

Approximately one ton
capacity powder from raw material can be stored in holding bin. It is
fixed in super 60 plant dust free and acts as an isolated storage
room from briquette press.
Screw Conveyer.

Smaller size screw
conveyer with counter system or reduction gear and electric motor for
feeding the powder from raw material to briquette press.
Cutter (Chipper):

Generally it is not
required but in special case there is availability of raw material is
of large size in long stick form like cotton stalk, Custard stalk
etc. It requires cutter to make small 20-40 mm length pieces of raw
material for easy feeding to Hammer