Cable Smoke Density Test Chamber Machine Weight: 150 Kilograms (Kg)

We Make, Export and Supply of Cable Smoke Density Test Chambers in Dongguan, Guangdong, China.

ST-7602Y Smoke Density Testing Chamber
Standard: This tester is in accordance with GB/T17651.1-1998 and IEC61034-1:2005, EN 61034-1:2005 and EN 61034-2, and standard GB/T19666-2005 a Flame retardant and fire resistant wires and cablesa and the requirement of GA306.1-2007: 6.3.3, GA306.2-2007: 6.3.3
Range: It is the test apparatus that determine the smoke density of cable under defined burning, ita s the ideal apparatus for special testing authorities and quality department.
Features:
1. Light source, it can focus automatically, the photocell point is uniform, the diameter of the photic point can be adjust focus is 1.5m
2. The light acceptor consists of the high-precision silicon photoelectric cell import from oversea, the line error less than 5%, can be meeting the standards of IEC 61034;
3. Control system composed by PC, software and ink color printer, the interface operation friendly, Widows system and 16 digits A/D transfer card, can be show by curve of the test result..
4. The A/D card as the module transformer.
5. Used the C Language for program, based on the operation system is Windows.
6. Alcohol burning tray, Draught Screen and burning stand are all made of stainless steel.
Technical parameters:
1. Dimension of chamber: 27m3 (3000*3000*3000mm), both sides near the floor with 2 holes to assure the air pressure inside and outside (option).
Note: Inside with dark gray color to assure not glisten to effect the test result.
2. Both sides of the burning chamber with a sealed window, which size is 100mm * 100mm, and the distance above the ground is 2150mmA 100mm.
3. At the top of the chamber with exhaust system, when test close and after test open.
4. Light source is a halogen lamp which power is 100w, voltage is 12V/DC, the luminous flux between the 2000lm~3000lm and the color temperature between the 2800k~3200k.
5. The acceptor photoelectric cell is a silicon photoelectric cell.
6. The photoelectric cell is installed in an end of pipe of 150mmA 10mm, dustproof window is installed the other end.
7. The photoelectric cell should attach loading resistance; the input impedance of recorder is at least 104 times bigger than the loading resistance of photoelectric cell, the loading resistance a 100IC.
8. The alcohol tray is made of stainless steel. The section is trapezoidal, the inner dimension: bottom is 210mm*110mm; super face is 240mm *140mm and the height is 80mm; the tolerance of all dimension is A 2mm and the thickness of plate is 1.0mmA 0.1mm.

For more detail please feel free contact us in any time. thank you