Coconut Oil Milling Plant

 Coconut Oil Milling Plant Coconut Oil Milling Plant  is designed for pressing most oil seeds. Its small size and tight tolerances means that it is very efficient at rupturing the structures of oil-bearing materials and extracting the oil. The mini Oil Expeller 1535 may also be used to process cooked and prepared oil seeds, where the pretreatment will enable greater oil yields than is possible with the expeller alone.Typically the Oil Expeller 1535 can be used in specialist applications, where small scale extraction of high value products is required. It may be used as a single stage oil expeller. The Oil Expeller 1535 is also ideal for small-scale pilot plant or research work. It is simple to set up and use, and its operating characteristics are similar to those of a full sized production presses, enabling good predictions of full scale applications to be made. Oil seeds with large particle sizes will require pre-breaking before feeding to an oil expeller. Chamber & Worm Assembly:The Chamber split on the centre line with the two halves bolted together. This design allows for quick and easy access to the expeller internals for cleaning or inspection, without any specialist lifting equipment. The chamber is normally filled with standard  cage bars, these are simpler and easier to maintain.The Worm assembly is made up of loose sections, built up on a keyed shaft. The parts slide on to the shaft from the discharge end, so that those parts experience the greatest wear  and those most likely to need changing for different seed types are the first to be removed from the shaft The compression in each zone can be adjusted, to suit the feed material and the required duty, with simply interchangeable pressure worm that are supplied as standard with each expeller