Digital Electronic Permitted Type Exploder

With the help of our technical experts, we have been able to trade, export and supply a huge assortment of Digital Electronic Permitted Type Exploder. Offered exploder is precisely engineered with the aid of modern technology by utilizing the finest grade components in compliance with set industry norms at vendors' end. It is extensively used for carrying out mixing, blasting, loading and explosive handling in various mines. This Digital Electronic Permitted Type Exploder is provided with a maximum circuit resistance of 160 ohms.Features : Tested by the CENTRAL MINING AND RESEARCH STATION DHANBAD as per IS 9836-1981 & approved by D.G.M.S. Dhanbad. POWERBLAST Exploder will not charge if the connected circuit has higher resistance then recommended, or the circuit is open. POWERBLAST Exploder does not fire till the rated output is attained, when the firing switch is pressed. POWERBLAST Exploder is provided with low battery indicator which gives warning that the battery is low and gets internally locked till the battery is replaced or charged. POWERBLAST Exploder will discharged internally If the firing is to be cancelled by turning the operating key to the "OFF" position. POWERBLAST Exploder Is very compact and has high impact plastic moulded body. Operation :POWERBLAST Exploder is very simple to operate : First check the instrument by inserting the key and turning it clockwise for the condition of the battery."L" indicates low battery and dot indicates that the exploder is "ON" Connect the external circuit leads to the exploder output terminals. By turning the inserted key clockwise the letter "C" will appear on the dial indicating that the circuit is In order. Keep the key in clockwise position until the letter "F" start flashing. Press firing switch to explode. If for some reason firing has to be cancelled, simply turn the key anticlockwise to the "OFF" position. Instruction For Use: Insert operating key and turn clockwise to 60, the Exploder will indicate "C" & then "F" starts flashing when full charge is attained. Press firing switch to explode Replace OR charge battery for 16 hours continuously when low battery indicator starts flashing Keep Exploder in dry place Checking : The capacity of the Exploder may be tested by special POWERBLAST Exploder tester. Technical Data Max. Circuit Resistance 160 Ohms with cable Firing Current 1.2 Amps. Energy 1.21 Ws Firing Tension 510 Volts. Duration of Firing Current Continuity Sensing Voltage & Current Open Circuit Voltage - 5 Volts Short Circuit Current - 5 Ma Max. Batteries AA Type Alkaline / NI-CD / NI-MH /LI-ION with minimum 700 Mah capacity. (6 Nos.) Working Temperature -20 to +55 degree celsius Height 180 mm Width 2 Kgs. Approx. Weight 95 mm Length 155 mm