Dispensing Booth By Cadillac Engineering Works

Dispensing Booth Dispensing / Sampling booths Dispensing / Sampling booths are used for filling, refilling, weighing & sampling of Raw material & Components Booths are designed to give mixed air flow stream for product, operator and environmental protection and used to control the hazardous emissions of dust powder during powder dispensing / sampling process. 0.3 micron downward air stream deflects air-borne dust away from the operator breathing zone which is caused in handling operation. Dust particle available is being filtered at three levels of filtration prior to being circulated back to the booths air stream. Specifications Description Specifications Type Front Open Direction of flow Vertical Material of Construction SS304 / MS Powder Coated Cleanliness Class 100 (US FED STD 209E) / ISO 5 (ISO 14644) Particle Retention 0.3 micron & Above Noise Level 65dB on On Scale 'A' 5 Velocity 90 FPM 20% Illumination Flourescent tubes diffusers Pressure Differential 0-25 mm inclined Manometers / Magnehelic Guage Power Supply 230V Single Phase, 50 Hz Pre-Filters 10 - 15 micron rating, 3-Layers of HDPE mesh, 6mm Pressure Drop Intermediate Filters 3 micron & above, two layers of HDPE woven mesh and one layer of Non-woven polyester Bondex Media, 9 mm Pressure Drop, Efficiency 97% Supply HEPA Filters 99.97% efficiency @ 0.3 micron ratting Exhaust HEPA Filters 99.97% efficiency @ 0.3 micron ratting Blower Assembly Statically & Dynamically balanced DIDW type blower system Special Features Designed in accordance with WHO-GMP3-Stage Filteration like Prefilter , Fine Filter , HEPA filterHeavy duty Low noise motor blower assemblySuitable to accommodate to floor & table balances