Drilling Cum Milling Machine Si-3m

Our range of Drilling Cum Milling Machine SI-3M are available at following Features :-
Proportioned column for rigidity of machine.
Rough & smooth feed available by manual and power feed.
Provision of window for change of gear on top cover.
Quill spacer made of mild steel.
Main spindle made of EN steel with 6 slots. 8 speed in either direction.
Grounded parts finished on imported grinding machine.
Major parts castings are of standard grade.
Head stock is bored on imported boring machine.
Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearings for smooth & accurate running.
Drilling
By fixing square working table at the place of cross slide, Drilling function can be had. This facility is the first of its kind.

Standard Accessories
Motor Pulley
Drift Key
Milling Collect Adapters
Optional Accessories
Coolant pump
Drill Vice
Reduction Sleeves Set
Electrical, 1.5 HP 1440 RPM Motor, R&F Switch
Fabrication base stand
MT 2/3, 3/4
In : Drilling
40 mm
Cast : Face Mill
100 mm
Iron : End Mill
25 mm
: Tapping
22 mm
In mild Steel Drilling
35 mm
Column Diameter
130 mm
Swing
610 Vmm
Working Surface
435 x 200 mm
Longitudinal Travel Manual
325 mm
Cross Travel
250 mm
Vertical Travel
400 mm
Quill Travel
220 mm
Spindle Taper
MT-4
Range of Spindle Speed
75 to 2070 RPM
No. of Spindle Speed
8
Distance Spindle To Base
940 mm
Base Size (Machine Area)
490 x 470 mm
Overall Height with Guard
1830 mm
Main Electrical Motor
1.5 HP
V-belt Section
B-62