Ecp Integra-external Counter Pulsation Device

ECP Integra-External Counter Pulsation Device is in the form of an integrated treatment bed that houses all the Electronic, Mechanical & Electromagnetic components. The control is through a 17" LCD monitor resting on the side platform of the treatment bed.

ECG Amplifier:-
1. Input impedance : >2MIC
2. Common-mode rejection ratio : >80dB.
3. Band width : 1-20 Hz on display.

SpO2:-
Oxygen saturation range : 0 to 100%.
Standard Deviation : 60-100%A 3 digits for adults using the Finger Clip Sensor. : 60-100%A 4 digits using Ear Clip Sensor.

Triggering Method
External trigger : R-wave of patient ECG.
External trigger ratio : 1:1 or 1:2.
ECG trigger range : 35-125A 1bpm.

Filter Technique
Low-pass digital filter dliminates 50/60 Hz and higher frequency interference.

Treatment Pressure Range
Adjustable from 100-350 mmHg by PC as needed.

Cuffs
Calves, lower thighs and upper thigh/buttocks (you can choose upper limb cuffs too).

Pressure tanks (2 nos.)
One each for negative & positive pressure (deflation & inflation).

Treatment Session Timer
Set treatment time from 15 to 60 minutes maximum. System automatically stops when set time expires.

Patient Protection
Automatic inflation stops and pressure releases in case of:-
1. Early extra systole.
2. High-pressure limit (<350 mmHg).
3. Heart rate goes outside the range of 35 & 125 bpm.
4. Emergency hand help stop button is actuated by the patient.
5. Emergency stop hand-held button (actuated by the patient).