Ethylene Oxide Sterilizer For Surgical Masks Chamber Size: 3000*1200*1700mm

Name: Ethylene oxide sterilizer
Power source: AC380VA A A 50Hz
Chamber size: (Length A A width A A height): 3500A A 1900A A 1800mm
Sterilization volume: 6 mA A
Sterilizer interior: 304 Anticorrosive stainless steel
Outer carton; Carbon steel
Temperature during sterilization: 50AcA A A A 3AcA A
Working pressure: -60kpa
Max anti-stress value: 150kpa
Humidity during sterilization: 5%-75%
Pressure sensor: The built-in pressure sensor automatically detects the pressure inside the cavity to ensure that the pressure in the cavity is accurate and effective.
Ethylene oxide sterilization concentration: 1g/L Adjustable
Leakage rate of sterilization chamber: The leakage rate is measured under the conditions of no-load and constant temperature in the sterilization chamber, the test pressure is -50kPa, and the measurement time is 1h. The average leakage rate within the measurement time is AcA A 0.16kPa / min.
Sterilization time: 0-99 hours Adjustable
Vacuum speed: 15-25 minutes to -60kpa
Air replacement: Automatic ventilation, ventilation times and interval time can be set freely.
Automatic control system: One-key start to end, the whole process of automatic completion with printing records.
Display status: Display temperature, humidity, pressure, sterilization time, residual gas treatment time, frequency.
Printer: Record and print the sterilization information of the whole process for verification.
Humidity sensor: The built-in humidity sensor automatically detects the humidity in the cavity to ensure that the humidity in the cavity is not less than 45% RH.
Residual gas treatment device: The removal rate of the filter with a particle diameter AcA AY 0.3 A A m is not less than 99.5%.
Temperature sensor: The built-in temperature sensor automatically detects the temperature in the cavity to ensure that the temperature in the cavity is maintained within an accurate range of 50 A A C A A 3 A A C.
Humidication system: Pulse humidification under vacuum to ensure that the humidity in the cavity is uniform and controllable; the humidity in the sterilization chamber should be controlled within the range of relative humidity 45% -80%;
Alarm system: High temperature alarm system, ultra-low pressure alarm system; When the sterilization temperature of sterilization chamber exceeds 59AcA A , the alarm shall be audible.
Vacuum rate: Under no-load condition, the time for the sterilization cabinet to vacuum from atmospheric pressure to -60kpa should be A 30min.
Vacuum system: The use of oil-free vacuum pump, simple and convenient, fast vacuum rate, long service life.
Multiple protection function: With over - pressure and over - temperature protection function, more safe and reliable.