Fabric Sheets & Round Diaphragm

Fabric Sheets & Round Diaphragm In most instances sheets have onward processing to become moulded parts. Their uses are in almost all branches of industry as punched or drilled items in, for instance, the automotive industry and in engineering and aircraft construction. Features All current Simrit elastomeric materials can be processed. Choice follows according to the respective application.Elastomer sheets can also be manufactured with a PTFE layer as well as with fabric reinforcement. Surface quality can be influenced by grinding or shot blasting.        Operating Conditions Media: depends on choice of material.Temperature: between -50 oC and 200 oC according to material. Production:Moulded sheets can be supplied in these sizes 300x300mm,500x500mm and in the thickness 0,5to6mm.Special sizes on request.Continuous production in ordering quantities>50 sheetsSheet size: up to 490x490mmSheet thickness: up to5 mmSheets made from silicone rubber and Fluoro-rubber are produced mainly in dimensions of 300x300 mm.With Shore hardness under 50 grinding is only possible in individual cases.When sheets are ground or shot blasted the surface quality is heavily dependent on shore hardness and on the base material. Sheets With Fabric Reinforcement For HighOperating Pressure The range of fabrics comprise the synthetic type with thickness berween0,12 and 0,75 mm.Production Provisions Fabric insert: for operating pressure to both side. Fabric layer: for operating pressure to one side. Sheets With Fabric Layer One side pressed amooth or one side ground Minimum sheet thickness: 0,5 mm + thickness of fabricSheets With Fabric Insert Bothside pressed amooth or one side ground Minimum sheet thickness: 2x0,5 mm + thickness of fabricSheets With PTFE LayerApplications With low breakaway forces even after longer standstillsIf higher thermal or chemical resistance is requiredWhen the surface should be smooth and non-stickFor low friction co-efficientOne side formed smooth, one side PTFE coatingMinimum sheet thickness: 0.5 mm +PTFE layer