Flow Meter By Beda Flow Systems Pvt. Ltd.

We are an acclaimed name engaged in exporting and supplying wide range of Flow Meter in the domestic and international market. Procured from the well established vendor base, these meters find their extensive usage in different industrial areas like power, cement, steel and petrochemicals for measurement purposes. Made available in varied sizes and technical specifications, this Flow Meter can be purchased from us at pocket friendly price.      Features         Low pressure loss Pulsation free measurement High degree of precision   VSE Flow MeterRS flow meters measure the flow rate based on the screw pump principle. A pair of rotors fitted precisely into the housing constitutes the measuring element. An integrated gear and non-contact signal pick-up system detects the rotations of the measuring element and converts them to digital pulses. Together with the housing walls, the rotor edges form closed measuring chambers in which the fluid is transported from the inlet to the outlet side. The fluid volume put through within one main rotor rotation is the rotation volume, which is divided by the sensing gear and digitised, processed and output in the sensor module. In case of an 1-channel evaluation, a separate directional signal is available. An adjustable pulse filter can offset and suppress negative flows (e.g. generated by vibrations) while still in the device. The frequency of the output signals is proportional to the flow (volume flow) and depends on the respective flow meter size. The frequency range is from 0 to 100 kHz. The preamplifier is protected against reverse polarity and incorrect connection. It is suitable for fluid temperatures of -30C to +120C (-22F to +248F) and is mounted directly on the RS flow meter. Advantages High degree of precision that is mostly independent of viscosity Pulsation-free measurement Lowest pressure losses Short response time due to innovative rotor profile and reduced mass Highest functionality due to intelligent sensor technology Gentle fluid measurement Sensor System Explanation The non-contact pick-up system consists of two GMRbridges (sin/cos), which are located in a sensor unit in cartridge design. It detects the movement of the sensing gear and routes the sin/cos-signals to the preamplifier electronics. The preamplifier electronics digitise and amplify the sensor signals and multiply them by a high-resolution interpolator using adjustable settings. The square wave signals are bidirectional and can be utilised by any evaluating instrument as well as computers and PLC-controls. The resolution is selectable in steps from factor 1 to 128. Technical Specifications Size Measurement range(Qmax.) l/min. RVccm/rev VEccm/Imp. K-Factor*Imp./l min. K-Factor*Imp./l max. P max.bar Filteringmy RS 100 0.50 - 100 (120) 15.7 0.58 1720 22000 450 250 RS 400 1.00 - 400 (525) 56.5 3.14 318 40800 450 250 RS 800 4.00 - 800 (1,000) 180 10 100 12800 450 500 RS 2500 10.00 - 2,500 (3,000) 666 37 27 3459 40 500