Flush Door By P. R. Industries

Flush DoorIntelligent Flush doors are modern elegant and ready to use that can be easily installed with minimum efforts to protect and beautify your dream home. They are made out of high quality wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties Obviously the doors are made with chemically treated seasoned hardwood battens and frames.The cross bands veneers are uniformly dried to the requisite moisture content. They are then bonded with special quality Phenol formaldehyde synthetic resin as per the guidelines of IS:2202 Intelligent Flush Doors are treated for total termite and borer protection. the flush doors are manufactured under strict quality control conditions that exceed the ISI specifications. The doors can be manufactured according to customized sizes tooSizes and Thickness: Standard sizes available. You can choose from the door thickness of 30,32 and 35mmFlush Door - IS:2202(Part1): 1999



Test
ISI Requirement
Observed Value


Dimension
Length Width - + 5mm Thickness - + 1mm
Within Limits


Squareness
Deviation not more that 1 mm on a length of 500mm
Deviation below 1mm


General Flatness
Twist cupping warping no to exceed 6mm



Local Planesness
Depth of deviation at any point to be less than 0.5mm
Within limits


Impact Indentation Test
Depth of indentation no to exceed 0.2mm
Within limits


Edge Loading Test
Deflection of edge with max. To be less than 5mm
Within limits


Shock Resistance Test
No visible defect after test
No visible defects


Buckling Test
Initial deflection - <50mm, Residual deflection-<5mm
Within limits


Slamming Test
No visible damage after Test
No visible damage


Misuse Test
No deformation after Test
No deformation


Varying Humidity Test
No visible warping twisting or de lamination
No such defects observed


End Immersion Test
No de lamination at the end
No de lamination


Knife Test
Minimum Pass Standard
Excellent


Glue Adhesion Test
No de lamination
No de lamination


Screw Withdraw Test
Load to withdraw screw to be more than 1000 N
Load - >1000N