Foil Cutting Machine By Raj Electricals

Foil Cutting Machine  Foil Cutting Machine OR Slitting Rewinding Machine with duplex Shaft friction rewind system with 10 sets of
circular as well as razor blade slitting system with 5 HP DC variable speed
drive and control panel with trim collection attachment etc with Web Aligner
(1/2 HP).  1} UNWIND UNIT for FOIL CUTTING MACHINE:-

 .      Trolly Type Fabrication With
Heavy Side Frames is Provided. Unwind Shaft Made From EN is provided Complete
with tapered CI / Steel Adopters 
for  76mm / 150mm* ID Cores Check
nuts etc, Resting on Ball Bearings.

2.      Max Unwind Dia          : 
1000 mm.

3.      Max Rewind Dia         
: 600 mm.

4.      Max Unwind Width      : 
1000 mm

5.      Min Slitting Width        : 
25 mm.

6.      Min Unwind Width       : 
300 mm

7.      Equipped With Edge Guiding
System mounted on trolly. 

 2} IDLERS IN FOIL CUTTING MACHINE :-

 Re-silent Aluminum Idler with end flanges for
bearings locked on zinc plated tie bars. These rollers are dynamically balanced
for trueness and smooth running.

 3} INFEED UNIT :- Consists of :

 1.      One Dynamically Balanced,
Ground , Hard Chrome plated mirror finish, closed end type steel roll of 6 j

2.      One  Rubber Nip Roll Which Can be  engaged or disengaged mechanically.

3.      Drive to the unit to
provided from in type 5 DC Motor which runs the Slitting Units through a geared
train.

 4} SLITTING UNIT IN FOIL CUTTING MACHINE  :-

 Provision  A

Male Female circular slitting system with 10 sets of
knives with Aluminum spacers for accommodating various slit width are provided.
Both the shafts of EN material, are machined to close tolerances.

 Provision B 

Razor Blade Slitting System is also provided with 10
sets of Razor Blade Holder Groove Roll having 1mm wide groove in 2 mm
internals. The Roll is duly Balanced Ground & Hard Chrome Plates.

 5} REWIND UNITS  :-

 1.      Duplex Rewind Units are provided
having pedaled type shaft mounts.

2.      42 mm dia rewind shafts are
made from EN Material with through keyways are ground and zinc plated.

3.      Accessories for the rewind
shafts includes, spacers Gun Metal Core Holder Suitable for 76 mm ID Core ,
Pressure Plates, Friction   Liners ,
Springs Shafts, Check Nuts, etc.

4.      2 Sets of Light Weight lay
on rolls are provided on each rewind units.

 6} TRIM COLLECTION IN FOIL CUTTING MACHINE:-

Ventury Type high power suction units are provided
with blower of 1 HP 440/volt  Cap for
collection.

 7} CONTROL PANEL :-

Vertical Cabinet Type Control Panel is provided with
5 HP DC Drive
, Torque Winder drive, Trim Collection Blower Operation, Speed indicator,
on  speed fast and slow, volt and amp
indicator , MCBs Contactors relays and other in necessary  Electrical required for the operation of the
machines.

8} CONNECTED LOAD FOR FOIL CUTTING MACHINE:-

Main Motor                  :  5 HP DC / 440 /Volt. :  1 No.

Blower Motor              : 
1 HP AC / 440 Volt.   : 1 No.

Web Aligner Motor     :
0.25 HP AC/440V : 1 No.