Gel Plate

SPECIALLY DESIGNED GEL PLATE FOR RESIN TEST
Salient features of Gel Plate:
- PID Microprocessor Control.
- Uniform Surface Temperature.
- Thick Alloy Block.
- I.R. Heater.
- Top Surface Harden & Grinded

SUITABLE FOR RESIN TEST

CONSTRUCTION
- The heating block is made out of Thick Alloy block duly machined harden & grinded/polish & fitted with Pt-100 sensor.
- The heating block is fitted with specially designed ceramic/infrared or suitable heater.
- The Hot Plate will be supported by 4 heavy angle. The control system will be provided separately consisting of PID Controller, Mains ON/OFF switch, SSR & Electronic circuit etc.

TECHNICAL SPECIFICATION :
SIZE OF HOT PLATE : 150 x 150mm approx.
THICKNESS OF TOP PLATE : 30/35mm approx.
TEMPERATURE RANGE : R.T.+ 15 Deg. C above ambient to
250 Deg. C surface Temp.
RESOLUTION : 0.1 Deg. C.
CONTROL ACCURACY : +/- 3 Deg. C or better.
SURFACE TEMPERATURE UNIFORMITY : Within +/- 1% FSD or +/- 3 Deg. C or better within 120mm x 120mm surface area from center.
OVERALL SIZE : As required.