High Quality Micro Ohm Meter

We are the exporter and manufacturer and supplier of the High Quality Micro Ohm Meter in Gurgaon, Haryana, India. Our provided meter is manufactured at our premises making use of the finest quality raw mate making use of the finest quality components that are obtained from the authorized vendors of the industry. Our quality controllers rigorously test its quality on varied parameters before the final delivery from our end. In addition to this, it is used for measurement of resistance () by injecting a heavy current through a breaker contact or load carrying joint.

Its Features are:
Less maintenance
Easy operation
High efficiency

Its Product Details are:
In response to ever growing demands for safer and more accurate methods of testing circuit breakers. It has developed the self powered MM100 portable micro ohm meter. It is used for measurement of resistance () by injecting a heavy current through a breaker contact or load carrying joint. A regulated 100A continuous or pulsed current output is used for regular resistance measurement. Alternatively a high current pulsed output (1200A maximum at 4V) allows for testing of the latest arcing and main contacts that require more than 500-600A to determine the difference between them, as well as to see if they are able to carry such a current.

As a stand-alone unit, static testing can be performed with a direct readout on a built in LCD meter. When used in conjunction with the Weis SA100 switchgear analyser / breaker tester (having a travel input for breaker mechanism movement), a dynamic microhm test can be made that will give detailed information about the state of fixed contact surfaces, moving contact surfaces, main contact, arcing contact and the complete current circuit of the breaker in every step during a close-open operation.

Its General System are:
Back-lit 3digit LCD for readout of Ohms or Amps (switch selectable).
Current On lamp indication (red).
Unit Armed lamp indication (green).
Trigger In (volt free contact) for Dynamic Micro ohm Test (SA100 required) and Trigger Out (15V logic).
Intermittent audible during continuous operation.
Operate push button for 100 / 1200A pulse or 100A continuous with stop.
Modes of operation (static testing).