Holographic Polyester Film

SPICK Offers
Holographic Polyester film 13 micron
Design -lots of dots or sequins
silver or gold
width upto 60 inch
for lamination and printing

TECHNICAL DATA SHEET
HOLOGRAM CTS -SEQUINS
PRODUCT DESCRIPTIONa :a a APPLICATIONS:a a KEY FEATURES:
This is a Polyester film is a holographic design embossed on with heat with cylinder to Provide 3D effect
Water based Glue is used to laminate PET film with Silicone paper

PROPERTIES
TEST METHOD
UNIT OF MEASUREMENT
TYPICAL VALUE
Thickness (Bare film)
Internal
Micron
25-50(A 5%)
Total Grammage
Internal
Gm/m2
45-90(A 5%)

PRODUCT COMPOSTION:
Hologram CTS Sequins is 25-50 micron thick Polyester film with 20 GSM water based adhesive and 80-100 Gsm paper Cut in sheets of DIN A4.
STORAGE & HANDLING:
Hologram CTS Sequins need to be stored in closed space and temperature should be less than 30a C & humidity 55A 5% in storage areas and material should be consumed within Six months from the Date of receipt.
COMPOSTION:
POLYESTER FILM 30% RELEASE PAPER SILICONE COATED 60% 10% WATER BASED ADHESIVE
DISCLAIMER:
It is the responsibility of our customer to determine that their use of our product(s) is safe, lawful, and technically suitable in their intended applications. The values give in the certificate represent typical values based on the best of our knowledge as on date when the data was complied. It is offered solely to provide possible suggestions for your own experimentation and not as a guarantee for the material supplied. The user is solely responsible for the end use of the product & needs to perform their own test to confirm the product suitability/compatibility in all respect. SPICK gives no warranty or accept liability for any loss and fitness of the product for any specific purpose