Horizontal Mono Submersible Pumpset By Mukund Engineering Work

Horizontal Mono Submersible PumpsetAdvantage of HMPS Over Monoblock Pumps HMPS Monoblock This requires only size of piep thus reduction in cost of Suction Pipe. Monobloc Pump requires two different size of Pipeline i.e. Suction & Delivery Priming is not at all required before starting. Priming is required before Starting. Footvalve is not needed and since the pump is submerged in water so continuous flow of water is assured. Footvalve is must and due to dust & leakage in Suction Pipe line flow of water is affected. Since this is installed at the bottom of the well/tank. Its performance does not affect due to change in water level. Since the Suction capacity is limited Monoblock requires shifting due to change in water level. Pilferage is not possible. There is every possibility of pilferage of Monoblock. No maintenance required, as bearings are water lubricated and motor is water cooled which increases the life of motor. More maintenance is required because there are chances of buring of motor. Pump house is not required Pump hosue is required. Noise free. Noise problem. Selection Table for Openwell Horizontal Mono Submersible Pumpset (Low Head) 3 Phase, 415V, 50Hz. Pump Type Motor Rating H.P. (K.W) Pump Size m.m. Total Head In Meters 6.0 8.0 10.0 12.5 14.0 15.0 16.0 17.5 18.0 20.0 22.0 22.5 24.0 25.0 26.0 27.5 30.0 35.0 40.0 Discharge In LPM. HMPS-3 3.0 (2.2) 65 x 65 830 780 720 600 480 HMPS-5 5.0 (3.7) 65 x 65 780 720 660 480 HMPS-5 5.0 (3.7) 75 x 75 858 810 750 695 618 522 384 HMPS-5 5.0 (3.7) 100 x 100 1860 1740 1620 1320 780 HMPS-6.5 6.5 (4.8) 65 x 65 960 900 780 720 660 480 HMPS-6.5 6.5 (4.8) 100 x 100 1200 1050 900 750 600 HMPS-7.5 7.5 (5.5) 75 x 75 1080 960 900 840 720 480 HMPS-7.5 7.5 (5.5) 100 x 100 1440 1380 1200 960 840 HMPS-10 10.0 (7.5) 75 x 75 1200 1140 1080 1020 960 780 540 HMPS-10 10.0 (7.5) 100 x 100 1620 1560 1320 1080 840 Selection Table for Openwell Horizontal Mono Sub. Pumpset (High Head) 3 Phase, 415V, 50Hz. Pump Type Motor Rating H.P. (K.W) Pump Size m.m Total Head In Meters 8 10 12 14 16 18 20 22 24 26 28 30 32 36 40 44 48 52 54 56 60 64 Discharge In L.P.M. HMPS-3 3.0 (2.2) 65 x 50 575 560 530 510 485 460 430 390 330 250 HMPS-5 5.0 (3.7) 65 x 50 490 475 450 430 410 320 HMPS-7.5 5.0 (5.5) 65 x 50 510 495 460 430 380 320 220 HMPS-10 10.0 (7.5) 65 x 50 460 425 400 370 340 300 250 200 Selection Table for Openwell Horizontal Mono Sub. Pumpset (Multi Stage) 3 Phase, 415V, 50Hz Pump Type K.W. H.P. Pump Size m.m. Total Head In Meters 34 38 42 46 50 54 58 60 Discharge In L.P.M. HMMS-5 3.7 5 50x50 270 152 234 210 192 162 138 72