Industrial Diaphragm Level Switch Max. Current: 5 Ampere (Amp)

Backed by our immense experience and knowledge, we are involved in manufacturing, exporting and supplying best quality Industrial Diaphragm Level Switch from Pune, Maharashtra, India. We offer Diaphragm Level switch for measuring level of free flowing and dry material like food grains and powders and bulk goods.

APPLICATION:
Sensing clogging of material on screw conveyor
Boot level detection of bucket elevator
Detect level of food grain in hopper
Level detection for bulk goods
Detects bin overflow and maintain a pre- determined material level
Can be used as Chute Block Device

OPERATING PRINCIPLE:
The pressure of the product on the membrane operates a limit switch inside the switch compartment. The contact of limit switch is used for control action.

FEATURES:
Point level switch
Low cost but Reliable
No power supply required
Installation is simple.
Flush mount, non-intrusive
Ideally suited when vessel size or internal clearance is limited or where protrusion into a vessel is not acceptable
Over-Pressure Protection

SPECIFICATIONS:
Enclosure : Cast Al, IP 40
O/P : 1 C/O relay contact rated for 15 Amp resistive at 230 V AC
Mounting : Flanged
Pressure for detection: Approx 2 N min. Normal Sensitivity: 60 gm
Operating Temp : 10 - 80 0C
Diaphragm Material: SS / Neoprene Rubber
Particle Size: up to 30 mm and a density of 0.3 to 2.5 g/cm3