Kemclean-1550 (Floating Type Paint Booth Additive)

Kemclean-1550 (Floating Type Paint Booth Additive)(Floating Type Paint Booth Additive) Product DescriptionThe product is specially developed for the treatment of recirculating water in water backed paint spray booths and designed to be particularly suitable for use in large installations. Kemclean-1550 eliminates any over spray paint, rendering subsequent cleaning and maintenance much simpler. When mixed with a small quantity of mineral oils in pump spray booths, the cleaning of booth becomes much easier. Product Specifications a. Colour Off White Powder b. Chemical Composition Blend of sodium salt of carbonate, bi-carbonate, Hydroxide, Polyphosphates, Aromatic Phenols as antisettling agents ionic emulsifiers c. Odour Nil d. Foaming Tendency Moderate e. Reliability Good f. Handling Avoid Skin Contact g. Solubility Good h. pH Alkaline Range I. Toxicity Nil j. Flash Point Nil k. Pollution Hazard Moderate Product Operating Data Strength 5 kgs/1000 ltrs. pH 9 -11.0 Pointage 6 - 8 ml. Product Operating ProcedureMix 5 kgs. Kemclean-1550 powder in 1000 ltr. bath tank and churn it for 15-20 minutes to get Phomogenous solution and check its pH. In case of no-pump booth add 25 ltrs. of waste engine oil (mineral oil) in 1000 ltr. of bath solution until some free oil floats on the surface. Product Application EquipmentsKemclean-1550 tank should be fabricated with 3 - 4 mm thick M. S. plates with continuous agitation arrangement. Product Application Equipment pH Value Dip a strip of universal indicator paper in the solution and measure the pH value. pH should not be less than 10. PointagePipette out 10 ml. smple. Add 2 to 5 drops of methyl orange indicator. Titrate with N/10 sulphuric acid to reach end point as red colour. Pointage should be maintained above 7 ml. For each point below 7 ml, add 725 gms of Kemclean-1550 per 1000 ltrs. solution to raise pointage by one unit. Chemical Replenishment Paint floats in form of light porous lumps on the top of the tank solution, which should be taken out on weekly basis to avoid pump clogging and when tank becomes quite dirty and contaminated with fine paint particles, the tank should be discarded. Safety MeasuresKemclean-1550 contact with skin, eyes, and clothing's should be avoided and proper safety precautions should be taken by operators by using gloves, goggles and safety clothing. In case of accident, the affected portions should be continuously flushed with water,  and a physician should be immediately consulted. General InformationPaint Maintenance becomes quite easy and hassle free. Use of this chemical reduces machine down time.