Laser Cleaning Machine To Remove Rust, Oxide, Grease And Paint Voltage: 220 Volt (V)

Principles and methods of laser cleaning
Laser is characterized by high directivity, monochromaticity, high coherence and high brightness.By focusing the lens and the Q switch, the energy can be concentrated into a very small space and time range.In the laser cleaning treatment, the following characteristics of laser are mainly used:
1, the laser can achieve a high concentration of energy in time and space, focusing laser beam near the focus can produce several thousand degrees or even tens of thousands of degrees of high temperature, so that dirt instantly evaporation, gasification or decomposition.
2. The laser beam has a small divergence Angle and good directivity. The laser beam can be gathered into spots of different diameters through the focusing system.Under the same laser energy condition, the laser beam spot with different diameters is controlled.
3. The energy density of the laser can be adjusted to make the dirt expand under heat.When the swelling force of dirt is greater than the adsorption force of dirt on the substrate, dirt will break away from the surface of the object.

Application scope of laser cleaner:
1, metal surface derusting;
2. Surface depainting and depainting treatment;
3. Clean oil, dirt and dirt on the surface;
4, surface coating, coating removal;
5. Pre-treatment of welding surface/spraying surface;
6, stone surface dust and fixtures removal;
7. Rubber mold residue cleaning.