Loom Conversion For Hdn-4/hde-4 Loom

Our
firm holds a renowned stand in the industry as the service provider
of Loom Conversion. These
services are widely used in different textile and yarn weaving
industries. The equipment used for rendering these services are
supposed to be the best that is available in the market. Known for
their prompt nature, these services have gained a high demand among
our clients. The services of Loom
Conversion is rendered to the clients as per their requirements.
Other details:
ABOVE ASSEMBLY CONSISTS OF FOLLOWING MAIN ITEMS. (Refer enclosed line diagram, item shown in RED will be supplied.) Loom Centre Portion: Complete
Centre Loom with Hoop Ring Assembly, Reed Ring Assembly, Bearing Block
A AcAca A Aca A Belt Assembly, Cam Assembly, 06 NoA AcAca A Aca Acs, Shuttle Assembly,
Compensator Assembly, as shown in accompanying catalogue.A suitable Take
up frame structure only on which will be mounted the old Take up
Assembly to take your take up pillars outside and accompanying hardware.
Main Motor Inverter in a separate panel box which will be synchronized with your existing Main Control panel ABOVE ASSEMBLY DOES NOT INCLUDE FOLLOWING ITEMS AND WILL BE USED FROM YOUR OLD LOOM Creel
Assembly along with Adopters, Eyelet Brackets etc Main Loom Frame,
Platforms, Guide Rollers, Intake Roller, Combs etc Take up Gear Box,
Pick Gears, Take up Pillars and Take up Roller Assembly, Cloth Winder
Assembly complete with Drive & Motor. Main Motor & Main Control
Panel, Magnetic Weft Stop Motion, Caliper Cone assembly A AcAca A Aca A Cloth
Spreader Assembly Production A) Approx 2,700 * meters/day on 10 x 10 mesh at 900ppm.B) Approx 3,000 * meters/day on 10 x 10 mesh at 1000ppm * (Assuming 700 to 800 denier tapes on good quality bobbins with 18 A AcAca A Aca A 20% elongation and 3.0-3.5 kg breaking strength)