Medtronic Force Fx Electrosurgical Generator With Instant Response Technology

Keeping in mind ever-evolving requirements of our respected clients, we are manufacturing and supplying a premium quality range of Medtronic Force FX Electrosurgical Generator with Instant Response Technology in Mumbai, Maharashtra, India.

Product Details:
Brand : Medtronics
Weight : Less Than 8.1 kg
Height : 11.1 cm
Width : 35.6 cm
Length : 43.9 cm
Operating Range : 85 to 132 AC volts
Maximum Current : 7 A (Cut), 4 A (Coag)
High Frequency Leakage : Less than 60 mArms (Bipolar), Less than 150 mArms (Monopolar)

"The Force FX generator C with Instant Response technology is designed for the most demanding monopolar and bipolar procedures, with a PER of 98 in a cut. It adjusts automatically, responding to tissue changes, maintaining power delivery, and minimizing drag. This offers a smoother cut through all tissue types.

Instant Response technology provides surgeons with improved performance at lower power settings, minimizing the risk of tissue damage and neuromuscular stimulation, and decreasing the need to turn up the generator. Lower voltage means less neuromuscular stimulation and more precise delivery of energy to reduce collateral damage."

Features:

Power Efficiency Rating (PER) of 98 enables accurate and consistent performance
3 internal microcontrollers to reduce system reaction time and increase the system's processing speed
3 cut modes - low cut, pure cut, and blend - all controlled by Instant Response Technology
4 coagulation modes - desiccate, fulgurate (high crest factor), fulgurate (low crest factor) and spray for coagulation of large tissue areas
3 bipolar modes - precise, standard and macro bipolar
A versatile system offering compatibility with a multitude of devices including those of other manufacturers

Low-Frequency Leakage (50-60 HZ)

Source current, patient leads, all outputs tied together.
Normal polarity, intact chassis ground < 10 A
Normal polarity, ground open < 50 A
Reverse polarity, ground open < 50 A
Sink current, 140V applied, all inputs < 50 A

Monopolar Coag:

Desiccate: 240 kHz sinusoid repeated at 39 kHz. 8% duty cycle.
Fulgurate: 390 kHz damped sinusoidal bursts with a repetition frequency of 30 or 57 kHz into 500 ohms
Spray: 390 kHz damped sinusoidal bursts with a randomized repetition centered at 28 kHz. Frequencies include 21kHz < f < 35 kHz. An output is further modulated by a random 250 Hz envelope with a variable duty cycle. Output power changes by less than 15% or 5 watts, whichever is greater, as the line voltage varies from 104-132 volts and 208-264 volts (at rated load).

Monopolar Cut

Low: 390 kHz sinusoid. Similar to the Pure Cut mode except the maximum voltage is limited to a lower value.
Pure: 390 kHz sinusoid
Blend: 390 kHz bursts of a sinusoid, recurring at 27 kHz intervals. 50% duty cycle envelope.

Output Waveforms

Bipolar

Precise: 470 kHz sinusoid
Standard: 470 kHz sinusoid
Macro: 470 kHz sinusoid

Adaptive REM
REM trip is baseline impedance plus 40%. For example, if the baseline impedance is 30 ohms, the upper-level trip is approximately 42 ohms. If the pad-patient impedance falls below the baseline impedance, a new baseline is established.

REM Contact Quality Monitoring System
Measurement Frequency: 80 kHz - 10 kHz measurement Current: Less than 10 A
Acceptable Resistance Ranges:

REM pad 5-135 ohms
Non-REM pad less than 20 ohms

Acceptance range is 5-135 ohms after
REM PolyHesive II return electrode is applied.
Acceptance range is 5-135 ohms after
REM PolyHesive II return electrode is applied.