N2zx Marble Crystallizer

With the rich experience in market, we trade and supply a extensive range of N2ZX Marble Crystallizer in Kishangarh, Rajasthan, India. This Powder Is Highly Concentrated. Use Very Small Quantity For Best Result.

N2ZX is an excellent product that is used to crystallize marble floors. It is to be diluted with water and applied with a 150 rpm single disc machine. A steel wool pad or a red pad can be used.

Caution:- Cover adjoinning fabric, plastic or parquet floors. Protect furniture from splashes. Use Paste immediately after preparation. Wear gloves and rubber boots. Store the powder under dry conditions.

Method Of Crystallisation :- 1 part powder + 2 parts water. Approximately one-fourth gm/sqft of powder is sufficient. We the surface, apply paste on surface. Use sparingly. Buff the paste well into the stone with a single disc machine and white polyester pad; run the machine along any one side and then at right angle to it. As the paste begins to dry Hi-Gloss shine will appear. You may spray small quantity of water in case the powder dries up too fast. After the powder dries continue to buff with white pads to enhance gloss and utilise powder completely. Wash thoughly after crystallisation with water and vacuum the floor dry.

Health & Safety Advice:- Contains oxalic acid and polishing media. R20/21/22: harmful by inhalation, in Contact with Skin and if swallowed. S37/39: Wear suitable gloves and eye/face protection.