Ndt Film Agfa Structurix F8 Nif X Ray Film

X-ray film AGFA Structurix F8 NIF 30x40 is a fine-grained, highly sensitive film suitable for use in various X-ray devices for industrial use. Allows you to obtain high quality images with good contrast.

Areas of application
Agfa Structurix F8 X-ray film is used in the field of inspection of concrete and metal structures, allowing you to obtain images of objects of large thickness. The resulting images help to identify breakdowns inside structures, corrosion and erosion processes.

Compliance
AGFA F8 X-ray film is produced in accordance with ISO 11699-1, ASTM E 1815 and EN ISO 11699-2 standards, therefore it is suitable for performing all types of scans in which the use of film regulated by these standards is recommended.

Peculiarities
Agfa Structix radiographic film has the following features:
Good sensitization, allowing the film to be used with all types of intensifying screens with ultraviolet or blue light.
High speed of developing images due to the sensitivity of the film.
A protected photo layer that is difficult to damage during unpacking, installation of material into the device, and even during processing. External influences have virtually no effect on image quality.
Sensitivity only to x-rays. Features of the photo layer help suppress glare, reflections and other defects when taking a picture.
Possibility of developing manually or on special roller machines.
When storing and transporting film, avoid sudden changes in temperature, humidity and direct sunlight, even if the film is stored in an envelope. If transportation is carried out in the cold season, you should not open the envelope until it is completely warmed up, since condensation can cause the sheets of material to stick together and damage the photo layer when the film is separated.

Required equipment
AGFA NDT F8 X-ray film is suitable for use in pulsed X-ray machines equipped with a fluorescent or metal fluorescent screen. Due to its high sensitivity, it can also be used in radiography using microfocus technologies (X-ray microscopes). The quality of the image will depend not only on the film, but also on the power of the device and the characteristics of the object of study.

Formats and types of packaging
AGFA F8 X-ray film is supplied in NIF packages, in which the film sheets are in a single packaging envelope and stacked on top of each other without interleaving paper. During transportation, avoid vigorous shaking of the envelope to avoid generating static electricity.
X-ray film has a format of 30 cm x 40 cm, which should be taken into account when choosing consumables for a specific device. If necessary, the film can be cut to save material or to adjust the format to the lens.