Plant Growth Chamber Application: Sample Preparation

1.Two Door systems Outer body/door is MS- powder coated with 5 mm thick acrylic window to view inside. Magnetic door closer with gasket. Inner thick transparent acrylic/Plexi glass to view the specimen without disturbing the inner samples.
2.Inside air circulation fan to maintain uniform temperature of the chamber.
3.Indirect heating system is provided, comprising of air heaters of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring very good temperature sensitivity.
4.An energy efficient cooling unit CFC Free compressor is installed Emerson Copeland Product.
5.Inside the chamber water reservoir is there with a immersion heater. An in-built water level cut off system is inside the water reservoir to maintain proper water level. Water level cut off system is connected with a valve inside control panel when low water the valve opens and when water is filled valve get closed. So, the water level is maintained perfectly- (Water level controller need to be cleaned on regular basis so that it works perfectly or else chances of overflow is there)
6.CFL Lamps inside the chamber for proper illumination to view the samples.
7.Control Panel Comprises of Temperature +Humidity controller + Light Controller. Temperature and humidity is interconnected and dependent on each other.
8.Inside 4-16 nos of light present. Light controllers have 25%, 50%, 75% and 100%. Light Controller controls the no of lights to be run and the desired time. Timer for light is inbuilt in the light controller segmented in 24 hours CAN BE SET AS PER NEED.