Printed Blister Foil By Shree Rang Pharma Printers

FOIL MATERIAL Hard Aluminium alloy AA 8011/ AA 1200 conforming to Aluminium Association specification. HEAT SEAL COATING
Colourless Vinyl Resin (option for tinted resin available), conforming
to the applicable government regulations regarding direct contact with
medicines and drugs. The resin is suitable for heat sealing to PVC/PVDC
coated PVC films. COATING THICKNESS OPTIONS (a) 4-6 GSM with a tolerance of +/- 0.5 GSM (b) 6-8 GSM with a tolerance of +/- 0.5 GSM Standard, if not specified, heat seal coating GSM is 4 with a tolerance of +/- 0.5. SEAL STRENGTH WITH PVC/PVDC 8 N/25 mm min. PRINTING AND LACQUER COATING
Printed as per text, layout and shade approved by customer. For
non-printed specification, clear lacquer to be coated as a protective
coating and good printability. Printing inks and lacquer coatings are
capable to withstand 180 deg.C for 1 sec. dwell time. CONFIGURATION Printed and uprinted Blister foils are available in the reel forms. Unprinted blister foils are also available as Jumbo roll. WINDING DIRECTION Generally printed or clear lacquer side is out with heat Seal coating inside. CORE Material options: (a) Plastic (b) Aluminium (c) Card board Core ID: 76mm +/- 0.5mm The length of the core is equal to the width of the web. SPLICES Butt type made with 25 mm pressure sensitive tape. REEL OUTER DIAMETER 250 +/- 10mm for slit material, 400 +/- 10mm for Jumbos. REEL WANDER Within +/- 1mm. REEL/WEB WIDTH Plain: 45mm to 800mm with a tolerance of +/- 0.5mm. Printed: 45mm to 600mm with a tolerance of +/- 0.5mm. JOINTS PER REEL Maximum - 2. Average - Less than 1. PIN HOLES 0.025 and 0.03mm foils are free from pin holes. In 0.02mm foil, 40% of foil is free from pin holes, rest less than 10 PSM. IDENTIFICATION
Each reel shall be identified with a sticker pasted inside the core
with the Reel number, specifications, Net weight, Gross weight, Operator
number & Date of manufacture. PACKING Blister foils are packed in cardboard carton. Relevant markings are provided on each outer package. RECOMMENDED OPERATING CONDITIONS Sealing temperature: 170 to 180 degC. Sealing pressure: 2.8 to 5.6 kg/sq.cm 40 to 80 lbs/sq.inch Dwell time: 0.25 to 0.5 sec. TEST CERTIFICATES Test certificates giving the actual observed values of different parameters will accompany the supplies.