Rg 6 Coaxial Cable By Fsc Cable Corporation

Telecommunication Cable PVC and Jelly FilledThe cable is Suitable for use in outdoor/indoor permanent installation telephone Exchanges and equipments, in house telephone wiring, EPBAX Systems, Industrial telecom/Intercom, satellite telecommunication systems, closed circuit security systems etc. Depending on the applications, cables can be armoured or unarmoured.UNARMOURED TELEPHONE CABLE Duct or direct buried cable for digital and analog data transmission between local exchanges to associated cross connection cabinets (feeder cable) and associated cross connection cabinets (distribution cable) to associated distribution points. The cable is used for transmission media for voice frequency signal in the frequency range of 300 Hzs to 3600 Hzs. For 64 Kbps.ARMOURED TELEPHONE CABLE -Duct or direct buried cable for digital and analog data transmission between local exchanges to associated cross connection cabinets (feeder cable) and associated cross connection cabinets (distribution cable) to associated distribution points. The cable is used for transmission media for voice frequency signal in the frequency range of 300 Hzs to 3600 Hzs. For 64 Kbps.We concentrate in supplying a matchless variety of finer quality of Jelly Filled cables, which are mostly used in assorted broadband applications. These self-sustained Jelly Filled cables are offered in two types of constructions armored and unarmored. They are mostly realistically priced. We manufacture the Jelly Filled Cables, which are obtainable in different insignia, sizes, other technological specifications and materialCoaxial cable (or "coax") is the most common cable used for transmitting video signals. The name "coaxial" refers to the common axis of the two conductorsCoaxial cables is a cable kind used to transmit radio signals, video signals, dimension signals and records signals. Coaxial cables subsist since we cannot sprint open-wire line near clanging objects (such as ducting) or bury it. We deal signal loss for handiness and elasticity. Coaxial cable consists of a protected center composer, which is enclosed with a shield. The signal is approved among the cable shield and the core conductor. This collection provide relatively good defensive again noise from outside cable keeps the signal well inside the cable and keeps cable uniqueness stable.Necessary properties of coaxial cables are their distinctive impedance and its promptness, their dwindling as well as their performance pertaining to the electrical division of cable and environment, i.e. their transmission competence. In relevance where the cable is used to give voltage for energetic components in the cabling system, the DC resistance has importance. In addition, the cable velocity information is needed on some applications.A coaxial cable has a solid copper or copper-clad-steel centre conductor surrounded by a non-conductive dielectric insulating material. The dielectric is surrounded by foil shield/s and/or copper braid/s which form the outer conductor and also shield against electromagnetic interference (EMI). The outer conductor/shield is encased in a PVC jacket.Most coaxial cables for video applications have a nominal impedance of 75 ohms. Their differing electrical and physical characteristics make it important to select the correct type of cable to suit the application. The three most commonly used coaxial cable types for video applications are RG59, RG6 and RG11. RG 59 is available with either solid copper or copper-clad-steel centre conductor. It's suitable for basic analog TV antenna feeds in residential applications and for basic CCTV systems over short cable runs. The copper-clad-steel type has high tensile strength and should be used when terminating the cable with F-Type connectors RG 6 is used for digital TV antenna cabling and for TV antenna cabling. It is also used for the distribution of Cable TV (CATV) and Satellite TV (SATV) in residential or commercial premises. It features a copper-clad-steel inner conductor. Single-shield, dual-shieldand tri-shield versions of RG6 are available but do not provide adequate EMI shielding.RG11 is used for the same applications as RG6 for either backbone cabling or for long distribution runs. It features a copper-clad-steel inner conductor. Choosing the correct cableUse the table below to determine which cable should be used for your application. Analog TV RG59/U Acceptable performance on cable runs <225 metres RG6/U Gives superior performance on cable runs <225 metres. Used for cable runs >225 metres but <545 metres. RG11/U For cable runs greater than 545 metres. CCTV RG59/U Acceptable performance on cable runs <225 metres RG6/U Gives for superior performance on cable runs <225 metres. Used for cable runs >225 metres but <545 metres. RG11/U For cable runs greater than 545 metres. DTV, CATV, SATV, MATV RG6/U Standard cable for these applications RG11/U Recommended for long cable runs and for backbone cabling.