Screen Printing Machine With Sliding Worktable

Mini Pneumatic-Drive Flat Screen Printing Machine SpecificationPrinting area: 200-300mmPrinting speed: 1000times/ hourPower: 110|220V 50WOutline dimension: 97*72*85cmWeight: 140kgApplicationThis machine focuses on the precise screen printing of kinds of shell surface, such as silica gel buttons, lens of cell phone etc. It adopts the back-forth sliding worktable. The printing of products and picking & placing are noninterference, which can improve the productivity and lighten workers workforce. This machine can organize mass product line of screen printing in small space for its mini size. Technical parameter1. Microcomputer control each function, high degree of automation2. Automatic counter with four digits, calculates the printing quantity3. Transverse stroke can be adjusted, spaced by Korea CDEO stroke switch4. Airframe adopts cast aluminum, and metal coating surface5. The angle of scraper /ink covering blades can be adjusted randomly6. Installing scraper constant pressure equipment to make sure constant pressure during printing7. Work-table can be adjusted back and forth or right and left, and can be fixed.8. The position of screen frame can be adjusted back and forth, right and left or level orientation9. T-slot table, easy to install jig; suction table is also available.10. Equipped with Taiwan CEC hydraulic buffer to eliminate printing shock11. The machine runs fast, stably and with little noise12. The original gas station is from Taiwan; the quality can be guaranteed.13. Action mode option: Fully automatic| semi-automatic| manual14.. Starting mode: Panel| foot switches15. Scraper pressure controller: constant voltage by pressure regulating Valve16. Vertical driving mode: Pneumatic17. Transverse driving mode: pneumatic18. Vertical stroke: 80mm19. Transverse stroke: 400mm20. Sliding worktable back-forth stroke: 400mm21. Maximum height of artifact: 100mm22. Standard of scraping gum: 9*50mm23. Max size of screen frame: 400*600mm