Sifting & Milling Equipment

Turbo Sifter is used to sieve dry raw material in powder form before it is fed to Rapid mixer &wet granulator or High shear mixer. The Turbo sifter is suitable for separation of foreign objects from dry powder before mixing. One can use mesh size from 4 to 25. This machine is used for mainly screening the formulations (in form of dry powder) before feeding it in to the high shear mixer or Fluid bed granulator. Dry powder is fed to Turbo Sifter through IPC or intermediate product container by positioning the IPC over the infeed mouth of the sifter. Normally IPC's are raised over the mouth of Turbo Sifter by using a lifting and positioning device or hoist. Lower portion of IPC is lowered inside the Turbo Sifter inlet through a special gasket which ensures totally dust free transfer. Now this powder after entering the turbo sifter is pushed towards the sieve area by screw in the sieve chamber. There are blades which while rotating push the material against the sieve. Sieved material will fall through the bottom opening.