Swing Check Valve By M-tech Lubes

Swing Check ValveWe manufacture and offer quality range of Swing Check Valve.
These are widely used in wide rang of industries where the flowing of liquid or gas is to be checked. The Swing Check Valves are manufactured using the materials having compressive strength. The







swing check valve also known as tilting disc check valve is check valve in
which the disc, the movable part to block the flow, swings on a hinge
or trunnion, either onto the seat to block reverse flow or off the
seat to allow forward flow. The seat opening cross-section may be
perpendicular to the centerline between the two ports or at an angle.
Although swing check valves can come in various sizes, large check
valves are often swing check valves. The flapper valve in a
flush-toilet mechanism is an example of this type of valve. Tank
pressure holding it closed is overcome by manual lift of the flapper.
It then remains open until the tank drains and the flapper falls due
to gravity. Another variation of this mechanism is the clapper valve,
used in applications such firefighting and fire life safety systems.
A hinged gate only remains open in the inflowing direction. The
clapper valve often also has a spring that keeps the gate shut when
there is no forward pressure.The machine is quality tested before delivering to the clients. These can be obtained at cost effective rates.
स्विंग चेक वाल्व