Tray Dryer By Shivang Furnaces And Ovens Industries

Normal
0




false
false
false

EN-US
X-NONE
X-NONE


























Striving ahead of conventional industry standards, we have
mustered up in manufacturing and exporting a wide range of Tray Dryer. It is
manufactured using best in class material and cutting edge technology. Widely
demanded in pharmaceutical, paper, food processing and agricultural industry, it
is used to dry various materials such as paper for printing and packaging
operations, chemicals for research and medical concerns and edible materials
for further processing into popular foods and snacks. Prior to dispatch, this
Tray Dryer is thoroughly checked on various stern parameters.

Features:

Robust constructionResistant to rust

Power efficient MODEL SED - 6 NO. OF DOORS ONE NO. OF TROLLEYS ONE NO. OF TRAYS 6 NO. OF FAN ONE FAN HP / EACH 0.5 HP TYPE OF HEATING ELECTRICAL / OIL / GAS / STEAM / THERMIC FLUID (HOT OIL) HEATER RATING POWER SUPPLY 415 VOLTS, 3 PHASE, 4 WIRE CABINET Cabinet of the dryer will be of 12/24 Trays capacity, made from MS angle frame of double wall construction lined internally with 18 SWG and externally 18 SWG MS sheet. The cavity formed in between double wall will be properly insulated with 50 mm thick Glass wool to prevent heat losses from dryer. DOORS Heavy duty airtight hinged doors made from 16 SWG MS sheet backed by 50 mm Glass wool on the inner side and ball catch locking arrangement together with 40 mm asbestoses gasket rope ensure very sturdy construction of the dryer. AIR CIRCULATION The uniform air circulation within the dryer will be carried by one No. of multi blade type MS fabricated fan mounted on externally on ball bearing pedestal and driven by 1/2 HP TEFC Electric motor. Air inlet and outlet dampers are provided on the top roof of the dryer cabinet. HEATERS Strip type heaters of 18 KW will be provided along the sides. The heaters are suitable to be operated on 415 Volts, 3 Phase, 4 Wire systems. RADIATORS Fins Tube Type Steam Radiator will be provided inside the oven. The radiator will be made of 14 SWG ERW tube with 26 SWG CRCA MS Fins at 6 FPI. The tube will be expanded after finning. The radiator will be tested at a pressure of 7 Kg/cm2 (100 PSI) pneumatically. CONTROL PANEL The Pre wired control panel will be consisting of Digital Temp. Indicator, Contactor for motor, Over current relay, Fuses, Indicating lamp, Push buttons, Main isolator switch etc. ELECTRICALS One No. 1 HP x 1440 RPM TEFC electric motors with set of pulleys and vee belts drive arrangement will be provided. TROLLEY The Structure For The Heavy Duty Trolleys Will Be Made From 40 Mm Ms Angle And Horizontal Support Will Be Of 25 Mm Angle. The Design Of Trolley Will Be Good Enough For The Proper Hot Air Circulation. The Trolley Will Be Fitted With 2 Nos. Castor Wheel And 2 Nos. Fixed Wheel For The Easy Movement. PAINTING The dryer will be spray painted with two coats of high temperature resistance Aluminum paint and the outside cabinet have one coat of Red oxide backed by hammer tone finished paint.