Waterproofing Systems By Krishna Colours & Constchem Pvt. Ltd.

We have a wide range of Waterproofing Systems (K5 Aquaguard A ) which provide water proof coating widely used in construction industry.

Application Instructions
Surface Preparation :
Substrate must be sound, clean and free from loose particles or laittances or contamination and preferably be wire brushed. Where cracks are present, cracks must be treated first depending on the type of crack.

Mixing :
Pour liquid in to suitable clean containers. Then slowly add powder while stirring with a mechanical mixer, carefully mix K5 AQUAGUARD A for a few minutes making sure that no powder remains stuck to the sides or the bottom of the container. Keep stirring until a perfectly homogenous mix is obtained. Use a low speed mixer for this operation to avoid much air being dragged in to the mix.

Application:
The prepared surface must be thoroughly wetted with water for absorption and excess water to be removed. Apply mixed K5 AQUAGURAD A by brush at a maximum thickness of 1 to 2 mm per layer. The second coat must be applied when the previous one is dry (after 8 a 10 hours.) The mixed material to be used with in 20 minutes.