Xlpe Insulated Power Cable By Henan Jiapu Cable Co.,ltd.

With the support of our expert, our company is dedicated Exporter, Manufacturer & Supplier of XLPE Insulated Power Cable in Zhengzhou, Henan, China.
STANDARD:IEC 60840 AS/NZS1429.2 VDE 0276-632
VOLTAGE:up to 110kV
CAPACITY:2000km/month
good electrical, mechanical and thermal characteristics
excellent moisture, chemical and weather resistant
low dielectric factor than PVC insulation and better dielectric constant
constant performance at a long temperature range
long service span
LV:IEC60502-1 ,VDE 0276-603, ICEA S-95-658 ,AS/NZS 5000.1
MV:IEC60502-2 ,VDE 0276-620 ,AS/NZS1429.1 ,ICEA S93-639 ,ICEA S94-649
HV:IEC 60840 ,AS/NZS1429.2 ,VDE 0276-632

Conductor
Copper or aluminum, round, multiwire stranded and compact
Inner semi-conducting layer
Semi-conducting compound, cross-linked,
Insulation
Cross-linked polyethylene (XLPE), compound type
Outer semi-conducting layer
Semi-conducting compound, cross-linked,
Concentricity of conductor
The difference between the maximum and minimum value of 0,5 mm should not be exceeded.
Semi-conducting type
Over the outer semi-conducting layer, a semi-conducting tape must be used.
Screen
Screening of copper wires must have a minimum diameter of 0,5 mm and over that a copper tape applied helically with a minimum thickness of 0,1 mm.
Separator
Over the screen as well as under outer jacket, a separating layer must be used (e.g. taping).
Outer jacket
PE compound or PVC compound