The Crack Depth is calculated by using the principle of acoustic diffraction of ultrasound waves. The method uses a specially designed test instrument where the transducers are positioned on the surface in a line across the crack. The average depth of crack is calculated by measuring the transit

In-Situ Compressive Strength (design strength, and existing structures)\015\012\015\012Rebound Hammer test measures the surface hardness of concrete with approximate correlations to estimate the compressive strength of the structure. Although the intrinsic limitations of the test may result in large

Half Cell Potential Tests is used to estimate the likelihood of corrosion in the reinforcement bars. The test is used extensively for condition surveys of suspect RCC structures to identify areas with corrosion activity for further analysis to establish the cause of corrosion and estimate residual 

In-Situ Compressive Strength (design strength, and existing structures)\015\012\015\012Cut and Pull Out (CAPO) is a reliable test method to determine the in-situ compressive strength of RCC structures. The CAPO test results are found to be within 8% of the results obtained from conventional methods

Low Strain Integrity Tests\015\012Low strain pile integrity test is a popular non-destructive test method to examine the piles for a uniform cross section and/ or detect flaws like voids, cracks, length etc.\015\012Test involves generating stress waves at the pile head and recording the response of

Monitoring the corrosion activity and determining the rate of corrosion in the RCC structures is essential for the condition monitoring and estimating the service life of the structural member.\015\012\015\012Corrosion Rate is measured using GalvaPulse. GalvaPulse evaluates the corrosion rate of rei

Integrity Assessment of RCC structures refers to the homogeneity of the structure and to examine the structure for any internal defects.\015\012\015\012Impulse Echo tests involve introduction of a stress pulse by a mechanical impact and studying the frequency response of the reflected waves. The do

We are well established firm offering Concrete Testing Services including Crack Depth Measurement, Rebound Hammer Testing Service, Half Cell Potential Test Service that are highly demanded among the clients.

AVANTECH ENGINEERING CONSORTIUM PVT. LTD. - Manufacturer of Concrete Testing Services, Corrosion Testing, Retro Reflectivity Testing from Delhi, Delhi, India.

Avantech Engineering Consortium Pvt. Ltd.

Concrete Testing Services(7)

All Categories

Crack Depth Measurement

Rebound Hammer Testing Service

Half Cell Potential Test Service

Cut and Pull Out (CAPO) Testing Service

Pile Testing Service

Corrosion Testing

Impact Echo Testing Service