All Welded Plate Heat Exchanger

Our provided All Welded Plate Heat Exchanger is shored from 4 corners, composed of the top and bottom head, as well as head with interface nozzle of four side cover. These parts are bolted together, it can be quickly disconnected for inspection, maintenance and cleaning.

Technical parameters:
Design temperature -20 0C~9000C
Design pressure vacuum ~ 6.0 Mpa
Assembly area a 6000 m2
Minimum temperature gap 10C

Remark:
Installing mode: Both vertical and horizontal are available;
If there are other demand for working condition of pressure and temperature, it can be also designed separately.

Features:-
a Wide applicable range, include various of temperature and pressurea physical features and space condition, the largest assembly area can reach 6000m2,applicable temperature varied from -2000C to 9000C,the varying range of pressure 0-6.0 Mpa.
a High heat transfer efficiency, all of the plates are wrapped in one vessel. The total heat transfer coefficient can reach 6000W/M2a c0C
a Plates are alternately soldered for easy inspectiona maintenance and cleaning.
a No hermetic gasket between plates, it can be used for heat recovery in corrosive operating environments , can bear higher temperature and pressure.
a Adopting corrugated plates, result in overall heat transfer coefficients five times greater than tube heat exchanger, meanwhile minimizing fouling, lengthening the lifespan largely.