Aluminum Alloy 3005 Round Bar

We are one the leading exporter, distributor and supplier a myriad collection of Aluminum Alloy 3005 Round Bar in Mumbai, Maharashtra, India. One can avail this range of product from us at most reasonable rates.

Product Details:-
Minimum Order Quantity50 Kilogram
Grade6000 Series
MaterialAluminium
Surface TreatmentCoated, Painted, Hot Rolled

Aluminum Alloy 3005 Round Bar Sheet Pipe Wire Forged Block

Introduction
Aluminium / aluminum 3000 series alloys provide a wide range of mechanical properties coupled with excellent corrosion resistance, weldability and formability.

Aluminium/aluminum 3005 alloy is a non-heat treatable wrought alloy with manganese as the key alloying element.

The following datasheet will provide more details about aluminium / aluminum 3005 alloy.

Chemical Composition
The following table shows the chemical composition of aluminium / aluminum 3005-T14 alloy.

ElementContent (%)
Aluminum, Al95.7 - 98.8
Manganese, Mn1- 1.5
Iron, Fe 0.70
Silicon, Si 0.60
Copper, Cu 0.30
Zinc, Zn 0.25
Magnesium, Mg0.20 - 0.60
Chromium, Cr 0.10
Titanium, Ti 0.10
Other (each) 0.050
Other (total) 0.15
Physical Properties
The physical properties of aluminium / aluminum 3005-T14 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.73 g/cm0.0986 lb/in
Melting point630 - 655C1170 - 1210 F
Mechanical Properties
The mechanical properties of aluminium / aluminum 3005-T14 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength180 MPa26100 psi
Yield strength165 MPa23900 psi
Elongation7%7%
Elastic modulus69 GPa10000 ksi
Shear strength110 MPa16000 psi
Hardness, Brinell (@load 500 kg; thickness 10.0 mm)4949