Aluminum Brazing Flux

We came into existence in the year 2004 and since then we are engrossed in offering excellent grade Aluminum Brazing Flux. This flux is used mixed with water to form a paste and applied on furnace brazing applications. Offered flux is processed at our well versed processing unit by making use of quality approved chemical compounds and contemporary techniques. Apart from this, our patrons can purchase this Aluminum Brazing Flux from us at negligible prices. Features: Longer shelf life High effectiveness Accurate composition Good solubility Other Info: Powder flux that can be used as supplied or mixed with water to form a paste. Residues water-soluble. DESCRIPTION:ALU BRAZING FLUX -1 is a powder flux for brazing aluminum and aluminum -based alloys, with an active temperature range of 345C , 690C/650F  1,280F.It promotes strong braze joints in aluminum alloys, without melting the substrate metals. The flux wets the joining surfaces thoroughly and prevents the entrapment of aluminum oxide inclusion s in the joints.APPLICATIONS: ALU BRAZING FLUX -1 is used primarily with gas-oxygen torches, but works in select induction and furnace brazing applications of aluminum metal and most com mon alloys. ALU BRAZING FLUX -1 is formulated for use with aluminum brazing filler metal alloys 4047/718 (585-592C/1080-1095F) and 4145/716 (575-580C/1060-107 0F). DIRECTIONS:ALU BRAZING FLUX -1 is formulated for use in powder form or mixed with water to make a paste.Best results can be obtained by following these guidelines: Base metals should be cleaned thoroughly to remove dirt, grease and other impurities. Heat the end of filler metal rod and dip into flux , or sprinkle flux on work-piece. At temperature, flux liquefies and flows into joints, removing surface oxide and impurities. Continue heating until the filler metal melts and fills the joint, producing shiny fillets. Flux residues are completely soluble in hot water. Flux is hygroscopic. Store in plastic with desiccant bags away from moisture and heat. SPECIFICATIONS:ALU BRAZING FLUX -1 meets AMS 3412D for aluminum brazing flux.PHYSICAL PROPERTIES: Form :  Powder (100 Mesh) Specific Gravity:  2.2 (Average) Volatile content:  <0.5 Lower Explosion Limit:  None Freezing Effects : None Humidity Effect:  Hygroscopic Active Temperature Range:  345-690 C/650-1275F SAFETY PRECAUTIONS:ALU BRAZING FLUX -1 contains chemicals that require this flux be used only in well-ventilated areas. Wear NIOSH approved gloves, goggles, and ventilation masks. Avoid contact with skin, eyes and clothing. Avoid breathing dust and fumes produced during soldering processes. In case of eye contact, flush eyes with water and call a physician immediately. Store flux in cool, un-humid environment in a very tightly sealed container. Desiccant bags are recommended to prevent hygroscopic absorption of humidity into the flux. ALU BRAZING FLUX -1 has a two (2) year shelf life when stored properly