Anti Piping Compound Apc Powder

Anti Piping Compound comprises a range of high quality exothermic and insulating powders for hot topping.
It is a powder formulation, supplied in bag form, which is used as a cover for the surface of the steel in ingot casting, to assist feeding.
Application Generally, sufficient material is adprovide at least a 25mm layer on the ingot head, the actual thickness increasing with ingot size. The application rate per ingot tonne thus varies from as low as 0.6 Kg per tonne up to 2 Kg per tonne, depending on the product type, ingot dimension and, to a lesser extent, steel quality. There is a range of APC recipes available to cater for different ingot sizes.
Application of pre-weighted bags of material is carried out simply by placing on the metal surface using a shovel, hooked tool, or by throwing. In the case of uphill-teemed ingots the recommended practice is to add the material once metal is within the feeder head. Where top-teemed ingots are concerned the anti-piping compound must be added on completion of the teeming cycle.
The function of the feeder head is to prevent lateral heat losses of the feed metal to the mould wall. In the feeding of ingots it is also necessary to prevent the excessive heat losses to the atmosphere from the radiating upper surface of the molten steel. This is achieved by application of a exothermic anti-piping compound.