Arm 9 Based Single Board

Following are the specifications of Arm 9 Based Single Board:
* ARM9 processor (EP9315) @ upto 200 MHz
* On-board 16 MB Flash, 64 MB SDRAM.
* Optionally, Flash size can be 8MB (only for 100+ quantity orders).
* Optionally, SDRAM size can be 32 MB or 128 MB (only for 100+ quantity orders).
* 3 UARTs: 2 RS232 and 1 selectable RS232 / RS422 / RS485.
* RJ45 Ethernet LAN interface
* Unique MAC ID is assigned to each board
* 3 USB Host interface ports
* PC/104 form factor.
* PC/104 interface: same footprint, similar bus with 3.3V signal levels.
* Touch-screen interface.
* All GPIO (3.3 Volts level) on connector.
* IDE interface for hard-disk or DOM.
* JTAG interface.
* TFT or STN LCD interface.
* VGA port for direct connection to standard CRT / LCD monitors.
* Audio in and out for direct connection to microphone and speakers.
* Battery backed up RTC.

Software:

* Runs embedded Linux or WindowsCE.
* Sample programs available.

Optional accessories:
* 5VDC 1 A power supply.
* Set of cables and connectors for USB, Ethernet, Serial etc.
* Serial cable for connection to PC.
* 128MB DOM.

Support:

* Technical support available through web-site (FAQ).
* Additional support available over email at extra cost.