Beer / Milk Stone , Scale Remover (Bsr 100-al)

PRODUCT BSR 100 AL ALKALINED BEER STONE / MILK STONE REMOVER / DESCALING COMPOUND   General Chemical Composition : Selective Blend of Organic Sequestering agents and Surface Active agents Appearance                                  : Yellowish Liquid pH                                                 : Above 8 Ionic Nature                                  :              Anionic Solubility in Water                      : Fully water soluble Rinsibility                                     :      Complete Reactivity with Metals                :     Does not cause any etching or pitting to Mild Steel and Stainless Steel   Mild reaction with Aluminum Application                                   :         Beer Stone, Corrosion, Milk Stone Remover and Descaling agent for Stainless Steel / Mild Steel Equipment. Additive with Caustic for CIP cleaning of Plant & Equipment Industries Applicable to              : Breweries, Beverage Manufacturers, Food Processing Industries, Dairies, Distilleries, Confectioneries, Ice Cream Cos., Sugar Factories, Pharmaceutical and any other industries having Boilers of Chilling Plants of Heat Exchangers. Procedure of use for Beer Stone : / Milk stone Removal and Descaling operation Spray Method 1)      Make Solution of required quantity as under:      Product BSR 100 AL          5.0 %  to  10 %      Caustic Flakes                     0.6 %  to  2.5 %      Water                                   Quantity Sufficient Spray the above solution with the help of  Spray Ball of High Pressure jet cleaning machine for Removal of Beer Stone, Scales, Milk Stone etc. from Fermentation Vats, Maturation tanks and Storage tanks.   2)      Circulation For removing Scales / Corrosion, dirt, charcoal etc. from Boilers, Heat Exchangers, Distillation columns, it is suggested to Circulate the solution of the required concentration with the help of pump till such time that the equipment is completely clean. Higher the temperature, better will be the efficiency.   3)      Coating Make consistent paste with Water and Inert material like Filter Aid of minimum 10 % of Product BSR 100 AL. Apply the paste to the surface of the vessel and allow it to remain in contact for a period ranging between 1 Hour to 24 Hours, depending upon the extent of Beer Stone. Rinse out the paste with Fresh Water, Use of Hot Paste and Rinsing with Hot water yields better results   4)      Manual Cleaning Suitable Solution of required concentration should be applied with Spray Brush to the walls of the Vessel preferably at an elevated temperature               (maximum possible) and allow it to remain on the surface for about one hour. It will loosen the Beer Stone / Scales which can be scraped off easily with the help of Industrial Scrubbers. Dosage                                           : Removal of Beer Stone and Heavy Scales  -  5 % to 10 % General CIP cleaning with caustic              -  0.5 % Temperature                                : Maximum Possible. Higher the temperature, better is the cleaning Contact time                                 : 1 Hour to 24 Hours depending upon factors like extent of Beer Stone, Milk Stone, Scales, Available Temperature, Method of cleaning and the Desired Results  Note :  After cleaning, the product should be rinsed out with Bacteria free Fresh Water and the out flow of water should be checked neutral to pH to ensure complete removal. As a precaution, use of  Handgloves, Goggles etc. as normally done while using alkaline material, should be taken. In the event of accidental contact with skin, eyes etc., the affected part should be thoroughly washed with water and doctors help be solicited