Bitumen Emulsion System (Uvb-1 8m3/hr)

We are engaged in exporting and supplying an excellent quality Bitumen Emulsion System (UVB-1 8m3/hr) to our valuable clients in Poltava, Poltavs'ka, Ukraine. Installation bitumen grade UVB-1 is designed to produce both anionic and cationic bitumen emulsions, which are used in road construction :
for tack of the old pavement before applying them on asphalt ;
to prepare cold asphalt mixes ;
for the surface treatment of road surfaces ;
Device for thin coatings of protective layers ;
for patching roads etc.

Parameter Value:-
1 Maximum performance (including preparation time ), 8 m3/hr
2 Consumption of bitumen ( penetration at 90 to 130 ), not less than 10.5 m3/hr
3 Water flow m3/hr 5 ... 7 *
4 Flow breaker ( with penetration bitumen below 90 ), dm3/hr 50 ... 350 *
5 Fuel acid dm3/hr 50 ... 150 *
6 Consumption emulsifier dm3/hr to 50 *
7 Consumption of adhesive additives dm3/hr 5 ... 50 *
8 Pressure bitumen at plant inlet, max 0.2 MPa
9 pressure is applied to the mixer bitumen, 1.4 ... 1.6 MPa
10 The pressure of the aqueous phase supplied to the mixer, 0.2 MPa
11 Temperature of bitumen entering the unit, 140-160 CA
12 Temperature of the water entering the plant, 40-60 CA
13 Lift height of the emulsion after installation (m) is not more than 10
14 Installed capacity more than 38 kW
15 voltage power circuits at 50Hz, 380
16, compressed air pressure, bar 4 ... 6
17 Airflow, dm3/min 250
18 Dimensions, mm, not more:
- Length 4850
- Width 2150
- Height 2200