Bm4 Series Hydraulic Motor

Our range of BM4 Series Hydraulic Motor is use of axial flow columns with the stator and rotor design, with a higher dispensing precision, mechanical and high efficiency.
Imported shaft seals, with a high back pressure bearing capacity of
At both ends of pairs of rolling bearing design, with a greater lateral load carrying capacity
A variety of output shaft, the oil port and other forms of mounting and connecting
To facilitate conducting the speed and rotation direction of the regulation of Maximum working pressure means the entrance of the maximum allowable pressure, rated working pressure means the pressure of work.
Does not allow the same time, the maximum speed and maximum pressure to use motors.
In intermittent working conditions, motor run time per minute should not exceed 10%.
Recommended fuel: Anti-wear hydraulic oil, viscosity 37 ~ 73cSt, oil cleanliness ISO18/13.
Maximum working oil temperature 80 a .