Bus Bars Pvc Heat Shrink Sleeves

We are leading manufacture and supplier a best collection of Bus Bars PVC Heat Shrink Sleeves that are widely used across the country due to their high electrical insulation and ultimate glossy finish. These Bus Bars PVC Heat Shrink Sleeves find extensive usage in Control panel boards, Switch-gears, Distribution boards etc.

Our Busbar HSS used to Insulate a Bus Bars and Conductorsa which provides excellent insulation with a High Dielectric Strength & a Good Retention of Dielectric Strength even under Wet Conditions.

Standard Colors Available : :

Black
Red
Yellow
Blue

Note : Other colors can also make on order eg. Green Etc.

Tolerances

Width : +/- 2mm
Thickness : +/- 0.03mm

Shrink Ratio

Machine Direction : +/-10% to +/-20%
Transverse Direction : 35% to 40% (+/-5%)

Technical Specifications

Voltage With Standing 1.1kv
Breakdown Voltage 15kv
Ultimate Elongation > 250 %
Tensile Strength > 300 kg / Sq. Cm.
Insulation Resistance 3 x 106 Mega ohms (at R/T)
Continuous Operating Tempt. Upto 105 degree Centigrade
Thickness 0.20 to 0.40 mm
Fire Retardation Self extinguishing, Non flammable
Corrosive effect - Non Corrosive Non Corrosive (Resistant to acid, alkalies & oil)