Ceramic Tiles Manufacturer

Slato Red Ceramic Tiles
Packaging Details:Packaging pcs: 4Square Meter:0.97Square Feet:10.43Thickness in (mm):8.90Tile weight(Kgs): 17.5
 
























It is used in -





















-


Satellite





-


Cup-saucers





























-


Vehicle-set





-


Bon-china





























-


Tiles





-


Medical equipments





























-


Electricity





-


Rifle making industry





























-


Sanitary ware


































Technical Specification for Vitrified Tiles          




 


Technical Parameters


ASTM


CEN


ISO


INT. STD


City Vitrified







Deviation in length / width


C 499


EN 98


10545-2


0.5%


0.05%







Deviation in thickness


C 499


EN 98


10545-2


5.0%


3%







Straightness of side


-


EN 98


10545-2


0.5%


0.1%







Rectangularity


-


EN 98


10545-2


0.6%


0.2%







Surface flatness


C 485


EN 98


10545-2


0.5%


0.2%







Water absorption


C 373


EN 99


10545-3


0.5%


0.04%







Scratch hardness (Moh's)


C 849


EN 101


-


6


7







Modulus of Rupture (N/mm2)


C 648


EN 100


10545-4


27


45







Breaking strength (N)


C 648


-


-


1113 N


> 2800 N







Skid resistance


C 1028


-


DIN 51130


> 0.4


> 0.4







Abrasion resistance (mm3)


-


EN 102


10545-6


205


< 144







Linear thermal expansion(/C)


C 372


EN 103


10545-8


6.4 x 10-6


6.4 x 10-6







Thermal shock resistance


C 484


EN 104


10545-9


No Damage


No Damage







Colour resistance to light


DIN 51094


-


10545-16


No Change


No Change







Glossiness


-


-


-


-


70 - 85







Chemical resistance (Except HF)


C 650


EN 106


10545-13


No Damage


No Damage







Density (gm/cc)








DIN 51082





2.4







Frost Resistance


-


-


10545-12


Frost Proof


Frost Proof







Decorative Faults


-


-


10545-2


Defect Free


Defect Free







Surface Quality


-


-


10545-2


95% Defect Free


> 95%







Impact Resistance


-


-


-


Good


Good







Crazing Resistance


-


-


10545-11


No Crazing


No Crazing







Resistance to house hold chemicals


-


-


10545-13


No Visible Effect


No Visible Effect




         

                Technical Specification for Floor Tiles          




 


Characteristics


IS : 13755Requirements GenSpecification Enitiblla


City Norms




 


DIMENSIONS & SURFACE QUALITY




A)


Deviation in length


0.5%


0.3%




B)


Deviation in thickness


0.5%


0.5%




C)


Squareness


0.5%


0.3%




D)


Straightness of side


0.5%


0.3%




E)


Surface flatness


0.5%


0.3%




F)


Surface quality


Min. 95% of tiles should befree from defect


> 95%




G)


Deviation in width


0.5%


0.3%




 


PHYSICAL PROPERTIES




A)


% Water Absorption


C 372


Below < 4%




B)


Modulus of Rupture / Bending Strength


C 484


300 kg / cm2




C)


Scratch Resistance (Moh's Scale)


DIN 51094


Min. 5




D)


Resistance of surface Abrasion


-


Depend on Series




E)


Crazing Resistance


C 650


Min 5 Cycle












Please read the following Instructions before Laying the Tiles












1.


Variation in shade, colour & pattern is natural features of ceramics, therefore we advised you to purchase sufficient tiles at one time to complete the job.












2.


First of all, before opening the boxes of tiles, please check manufacturing date, design name, colour tone and batch. We advise use the material having same batch and same date in a single room.












3.


Please check the level of prepared bed.












4.


Slope should be given on the surface on which tiles are to be fixed for water preparing flow at the time of mortar bed, The mortar bed or surface on which tiles are to be fixed should be fine, smooth, dirt free & dust free to avoid contamination.












5.


Ceramic / Vitrified tiles have inherent property of colour variation. So before laying please follow the instruction as below.







a.


First of all, lay the tiles in room without applying cement mortar and observe the tiles for colour tone & if some tiles does not match with others for colour or size, Please lay all tiles in such a way that arrow behind the tiles or symbol of tiles should remain in one direction in whole room.








b.


Please lay all the tiles in such a way that "arrow behind the tiles" or "symbol of tiles" should remain in one direction in whole room.




c.


Before laying the Stonela Series Tiles please Check that back side of the tiles symbol be in a same direction.











d.


To add beauty on the laid surface, a gap of 3 to 4 mm spacers can be kept between two tiles.




e.


Please fillup the joints between 2 tiles after 24 hours of laying




f.


After finishing the joint filling wipe out of excess grout with a damp sponge and polish the tiles with a soft wand dry cloth for a clean surface. The tiles can also be clean by mild acid.

















6.


Allow 3 to 4 days for bed drying












7.


Before doing cement or furniture work on laid tiles, we advise to use plain plastic(without printed) with POP coating on it












8.


We appreciate your suggestions & views regarding the design, shade & colour of tiles












9.


Good suggestion & customer satisfaction will helpful to use making your home flooring a thing of beauty & pride.












10.


Company cannot entertain any complain afte4r laying the tiles.