Crimp Cross Section Analysis Lab

Crimp Cross Section Analysis Lab SL SBL Micro 400The Micrograph Laboratory SL SBL micro 400 toolkit enables easy, quick, reliable and inexpensive assessments of the quality of a crimp connection.All of the applicable work steps, including cutting, grinding, etching and imaging, are integrated in this micrograph laboratory.A specimen holder with a quick tightener enables placing the sample without time-intensive mounting and resetting between the individual processing stages.With the SL SBL micro 400 portable micrograph laboratory, the operator is mobile and can immediately decide whether to release a product on-site after a tool change. A meaningful micrograph can be made at any time for spot-checking samples. Product Attributes Short processing-time (max. 5 minutes) Easy and comfortable use Integrated electrolytic etching station Sample-holder for all work items Integrated lighting Drawer for expendable materials System can be stowed completely in case Imaging with USB-digital-camera All Relevant Work Items Are Integrated In One Case Cutting Grinding Etching Imaging Cutting Module Range: up to 5,00 mm2 Speed: 20.000 rpm Cutting Wheel: OD 40 mm, Thickness 0.3 mm Imaging Module Magnification range 0.75x, 1.0x, 1.5x, 2.0x, 2.5x, 3.0x, 3.5x, 4.0x, 4.5x, 5.0x Steps identation on 1x, 2x, 3x, 4x, 5x Field of view from 1.2 mm to 8.2 mm (x-direction) Adjustable illumination with 4x segmented super bright white LED Etching Module Electrolyte process Processing time: 5 to 30 seconds Polishing Module Speed: 20.000 rpm Feed rate: 6.5 mm/sec. Z adjustable range for grinding Adhesive sand paper OD 50 mm Evaluation & Documentation Module 1.3 mega pixels USB 2.0 camera with SL Vision software Enhanced measurement tools including compression ratio etc., in compliance with Automotive Industry requirement Dimension & Weight Weight: approximately 20 kg Size: 500 mm (L) x 360 mm (W) x 450 mm (H) Power Requirement 230 VAC, 50 Hz, 300 Watts Size: 500 mm (L) x 360 mm (W) x 450 mm (H)