Digital Analog Electronic Training Kit

Digital Analog Lab Omega Type DAL-1043:The DIGITAL-ANALOG LAB is intended for elementary as well as advance training of Digital & Analog electronics. The trainer covers regular digital and analog circuits by solder-less interconnections on breadboard and as well as compatible with all optional modules, through use of 2mm brass terminals and patch cords. Various clock generators, logic level input/output indicators and DC regulated power supplies etc. are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords, instruction manual and component set.




Features:


Bread Board
Unique solder-less large size, spring loaded breadboard consisting of two Terminal Strips with 1280tie points and 4 Distribution Strips with 100 tie points each, totaling to 1680 tie points. Size:112mmx 170mm approx)


Regulated DC Power Supply
+5 V at 1 Amp, -5 V at 1Amp, +12 V/ 0 to 20V at 500mA, and -12 V/ 0 to -15 V at 500 mA


AC Supply
5-0-5V, 10-0-10V at 100ml. Can be used as 5V, 10V, 15V, 20V, and also as center tap


Function Generator
Sine/ Square/ Traingular waveform frequency 1 Hz to 110 KHz in 5 Steps. Variable in betweensteps. Sine/ Square/ Traingular waveform output 50mV ~ 10Vpp variable


Clock Generators
0.1Hz and 100 Hz, Independent fixed TTL 5V outputs


Variable Clock Generators
low frequency variable clock 1 Hz to 10 Hz Fixed TTL 5V output


Pulser Switch
2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of thecounter after every clock pulse)


Data Switch
16 independent buffered logic level inputs to select High/ Low TTL levels, each with a LED toindicate high/ low status and termination


Logic Indicators
16 independent buffered logic level indicators for High/ Low status indication of digital outputs


Speaker
8 ohms miniature speaker with terminations


Digital meter (3    Digit)
Dual range DC Voltmeter 0-20V/ Ammeter 0-200mA


Continuity Tester
For testing the continuity. Provided with Beeper Sound


Potentiometers
6 Potentiometers (1K, 22K, 47k, 100K, 100K and 1Meg) with terminals


BNC to banana adapter
2 Nos. BNC to 2 channel banana adapter


Computer interface
Facilities connecting your trainer to either Rs232 communication port of PC ADAPTER using 25 pin(male) connector through 25 nos. of 2 mm banana sockets


On Board Switches
2 Switches singal pole double through


Connecting terminals
2/ 4 connecting terminals


Seven segment LED Display
2 Nos. BCD to Seven Segment Decoder/ Driver IC with terminals


LED Bar Graph
With 10 LED Indicators and 20 termination


Logic Probe
Logic level indicator for TTL/CMOS


Power
230 V     10%, 50 Hz


Accessories
Mains cord, Operating and Experimental manual, Red & Black patch cords (2mm with Pin) 10 each,Red & Black patch cord (Pin to Pin) 10 each & Component Set


Instruction manual

Strongly supported by detailed operating instructions









Experimental Coverage:


     Analog

Study of Diodes in DC circuits
Study of Light Emitting Diodes in DC Circuits
Study of Half wave rectifier
Study of Full wave rectifier
Study of Zener Diode as a voltage regulator
Study of transistor series voltage regulator
Study of transistor shunt voltage regulator
Study of Low pass filter
Study of High pass filter
Study of band pass filter
Study of CE configuration of NPN transistor
Study of CB configuration of NPN transistor
Study of CE amplifier
Study of Monostable multivibrator using transistor
Study of Bistable multivibrator using transistor
Study of Astable multivibrator using transistor


   Digital

Logic gates operation
To prove De-morgan            s theorem with boolean logic equations
Binary to Gray code conversion
Gray code to Binary conversion
Binary to Excess-3 code conversion
Binary Addition and Subtractor
Binary Multiplier
EX-OR gate implementation
Application of EX-OR gate
Johnson Counter
To verify the dual nature of Logic Gates
Study of Flip-Flops RS, JK, D&T
Multiplexer and Demultiplexer
4 Bit Binary up and down counter
Study of 8 to 3 Line Encoder
Study of 3 to 8 Line Decoder
Study of Shift Register (SIPO)
CMOS-TTL Interfacing
Study of Crystal oscillator
Study of pulse stretcher circuit