Dizayn Pex-b Plus Pipe And Fittings Installation Type: Wall Mounted

Dizayn Pex-B Plus Pipe And Fittings General Specifications Polyethylene crosslink (PEX) pipes can be used on hot water and cold water tracks. Pipes manufactured by polyethylene raw material do not show resistance to hot fluids by their normal structures. When the chain structure is converted to crosslink structure they retrieve very high temperature resistance character. Their structures are then converted to thermoset structure which is not recyclable from recyclable thermoplastic structure. PEX pipes have four types. Obtained by PEX-a proxide method, PEX-b silane method, PEX-c irradiation method and PEX-d nitrogen method. The difference among these types is only the crosslink rate required by the standard. These differences are mechanically determined to ensure durability. PEX-a as being the first production method, it is an hard process. It is not preferred on the new investment. PEX-b is the silane method. Agent molecules in between the chains are placed and these agents form the Carbon joints by different chains on steam cure application. Process is the most preferred method as being completed in the company by all its phases. It continues to be crosslink during usage on hot water tracks.PEX-c irradiation method. Hydrogen atoms are extracted from carbon atoms by the beams and the chains are cross linked by the combination with the hydrogen on the other chain. Irradiation operations as being on other places out of production, transportation costs increases the product price. There are two different irradiation methods as being gamma radiation and electron bombardment. When the irradiation dose could not be arranged well chains can get damaged. The products changes color and becomes rigid. Because the gamma radiation kills the bacteria, the product is sterilized. It is preferred on sanitary system tracks by this characteristic. PEX-d is obtained by the nitrogen method. It can not be found on the market as it can not outclass in the competition conditions. As the PEX pipes become thermoset their welding ability is removed. Metal connection elements are used for connection. Metal connection elements are ringed union type which do not require additional equipment. During the compression of union with wrench, the ring fitted on pipe thread ensures impermeability by compressing the pipe with the conic structure of the union. Europe uses the ring system in addition. Electric compression tool investment is necessary for this method. But it does not have any superiority over the union system.Production SpecificationsPEX pipes are produced on extruder production tracks. Products are packed as 160 m coils. Placed inside steam tanks as PEX-b type coils and cure is applied for 10 hours. It reaches %65 crosslink value on chain structures. The product reaching this value is consigned. And the metal connection parts are designed in the company and manufactured in sub-industry.Advantages It can be used at PN10 bar at 95oC. Temperatures shows resistance instantly when it reaches 120oC. It can be used on the floor heating system. It is used on radiator connection of mobile fitting. Oxygen barrier can be covered and prevents the oxygen in air to pass into water through the pipe. Show high resistance to chemicals. It is light as its volume being 0,956 gr/cm3. It can be mounted easily without need of any tool with unions. It can be furnished in a short while and without loss as being 160 m coil. No corrosion. Its diameter does not become narrow by reacting with minerals