Double Cone Blender By Nemarit Engineering Pvt Ltd

i The conical shape at both ends enables uniform mixing and easy discharge.
i All contact parts are made out of stainless 304 or 316 quality material, as required by customer.
i Maximum care has been taken to ensure safe operation of the unit.
i Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. (In 200 Kgs. & above model)
i Two nos. of safety road will be provided at back side. ( One LH side & one RH side )
i Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with operable cover provided at other end of the cone for material charging & cleaning.
i One shaft with 04 nos. of fixed baffles with mirror polished provided inside the cone.
i Cone will be mirror polished from the inside & outside & structure will be matt polished.
i All moving parts covered with SS304 covers.
i Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
i Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
i As per customer requirement machine will be provided with left side drive or with right side drive.
i The conical shape at both ends enables uniform mixing and easy discharge.
i All contact parts are made out of SS304/316(as per customer requirement) quality material.
i Maximum care has been taken to ensure safe operation of the unit.
i Worm reduction gear use for speed reduction.
i Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
i Inside & outside of the cone will be polished to the mirror finished.
i General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you) in GMP Model.
i All safety guards & covers made out of SS304 in GMP Model.
Hand wheel will be provided for manual tilting of cone.
i Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.